Sanyo Think GAIA PLC-XE45, Руководство пользователя

Страница: 60 / 69

60
The CE Mark is a Directive
conformity mark of the European
Community (EC).
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the
projector or the service center. Specify the model number and explain about the problem. We will advise you
how to obtain service.
Pixelworks ICs used.
This symbol on the nameplate means the product
is Listed by Underwriters Laboratories Inc. It is
designed and manufactured to meet rigid U.L.
safety standards against risk of fire, casualty and
electrical hazards.
Page Up/Down function does not
work.
– Make sure your computer is connected to the projector with USB
cable.
– Check cable connection between the projector and your computer.
Indicator blinks or lights.
– Check the status of the projector with referring to "indicators and
Projector Condition" (see page 63).
Alarm does not stop ringing.
– Connect the AC power cord to the AC outlet. (Alarm will not stop
ringing when the alarm goes off while trying to remove the battery
cover.) (see pages 50-52).
Alarm rings even when the warning
mode is turned off.
– The battery may be coming to the end of its life. Replace the
battery with a new one promptly.
Warning mode is not turned on.
– If you cannot hear the bleeping sound when you press the Alarm
buttons, you are not pressing the buttons correctly. Try to set the
Alarm setting again (see page 50).
Computer 2 cannot be selected.
– Select Computer 2 in the Terminal function (see page 44).
The terminal function cannot be
selected.
– The Terminal function cannot be selected after Computer 2 is
selected. Select other input source such as Computer 1 or Video
with the COMPUTER button or the VIDEO button on the remote
control so that the Terminal function can be selected.
The exclamation mark appears on
the screen.
– Your operation is invalid. Operate correctly.
Unable to unlock the Logo PIN code
lock or Security PIN code lock.
– Contact the dealer where you purchased the projector or the
service center.
Appendix