Sanyo SRT-6000P, Инструкция по эксплуатации

Страница: 27 / 42

SERIES RECORDING
Using 2 VCRs or more, the series recording function
lets you switch recording from one unit to the next (only
with VCRs of the same model as this one).
Series Recording Setup
œ
Connect 2 VCRs or more as illustrated below.
œ
Set the TAPE SELECT switch according to the
duration of the tape used.
1
Press the REC/PLAY SPEED
l
(or
j
) button to set
the recording speed mode.
2
Set the following items as indicated.
Item VCR No.1 VCR No.2
and on
Cassette tape Loaded Loaded
Operation mode Stop Stop
REPEAT REC switch OFF OFF
Counter memory Canceled Canceled
“OUTPUT” (in (SET UP
1) menu)
SERIES SERIES
“SERIES REC IN” (in
(SET UP 3) menu)
Y (YES) Y (YES)
Timer recording OFF
(not set)
OFF
(not set)
Power ON OFF
Security lock Canceled Set
3
Press the REC button on VCR No.1.
ø
Recording will start in series recording mode.
4
Set the security lock on VCR No.1.
The SERIES OUT signal will be presence either at the
point when the counter reading is 7
H
57
M
00
S
or when
VCR No. 1 reaches the end of the tape, whichever is
first. The signal will stop 70 seconds after the tape end
point of VCR No. 1.
When this signal is received by VCR No. 2, it will start
recording. During the period when the SERIES OUT
signal is being received by VCR No. 2, if the STOP
button of VCR No. 2 is accidentally pressed, VCR No. 2
will go into the stop mode for an instant and then return
to the record mode.
To prevent this form occuring, the security lock of VCR
No. 2 should be set to the on condition.
If TAPE END MODE is set to “REW”, when the end of
the tape is reached “OFF” is displayed, the tape is
rewound then stops.
NOTES:
œ
If the counter reading on VCR No.1 is 7
H
57
M
00
S
or
more, when the REC button is pressed (step
3
), the
recording will start on VCR No.2.
œ
If in the (SET UP 3) menu “SERIES REC IN” is set to
“N” and in the (SET UP 1) menu “OUTPUT” is set to
“NON REC”, series recording will not be possible.
œ
The counter must start from the beginning of tape, or
the series recording out will not function properly.
œ
Even if “OFF” is displayed, series recording will be
conducted if there is an input at the SERIES IN
terminal.
Series recording connections
SERIES OUT.
NON REC OUT SERIES
IN
SERIES OUT/
NON REC OUT SERIES
IN
AUDIO
OUT
MIC IN REMOTE
PUSH
OPEN
EXT
TIMER IN
AC IN ~
IN
VIDEO
IN OUT
RS485 B A
COM
WARNING
OUT
TAPE
END OUT
SW
OUT
COM OUT IN
ALARM
OUT IN COM
TIMER
OUT – +
DC 10-30V IN CLOCK SET
RS232C
ADDRESS
ON
OFF
485
232
TERMINATE
ON
OFF
AUDIO
OUT
MIC IN REMOTE
PUSH
OPEN
EXT
TIMER IN
AC IN ~
IN
VIDEO
IN OUT
RS485 B A
COM
WARNING
OUT
TAPE
END OUT
SW
OUT
COM OUT IN
ALARM
OUT IN COM
TIMER
OUT – +
DC 10-30V IN CLOCK SET
RS232C
ADDRESS
ON
OFF
485
232
TERMINATE
ON
OFF
Video camera
To
VIDEO IN
jack
To
VIDEO OUT
jack
To VIDEO OUT jack
(VCR)
VCR No.1
To
VIDEO IN
jack
To
VIDEO OUT
jack
To COM terminal
(VCR No. 3)
To SERIES IN terminal
(VCR No. 3)
To COM
terminal
To
SERIES OUT
terminal
To COM
terminal
To
SERIES IN
terminal
To
SERIES OUT
terminal
To
VIDEO IN
jack
(VCR No. 3)
Monitor TV
VCR No.2
RR4QR/EX (SRT-7168P GB) Thu. Jan., 13/2000
26
English