Sanyo SCP-8500, Руководство пользователя

Страница: 41 / 155

Alert Notification
Your phone can alert you with an audible tone when you change
service areas, when there are incoming calls or messages, or
when your network signal is fading. Your phone can also alert
you once a minute during a call, or when a call has been
connected.
To set alerts:
1.
Select
> Settings > Sounds > Alerts
.
2.
Select an option and press :
Beep Each Minute
to set a minute reminder that beeps ten
seconds before the end of each minute during a call.
Out of Service
to set an alert to notify you of network
services parameter changes.
Connect
to set an alert to notify you when your call has
been connected.
Signal Fade/Call Drop
to set an alert to notify you when
your phone loses a signal during a call.
Messaging
to set an alert to notify you of text messages,
picture messages, or voicemails.
Repeat
to select a repeating status of the alarm (
Once
,
Repeat Alert
or
Off
).
Ringer Length
to set the duration for the alarm to ring.
Tip:
You can also set the Messaging alert by selecting
> Settings >
Messaging > Message Reminder > Text Message
,
Picture Msg
, or
Voicemail
.
3.
Select a setting and press .
Silence All
With the phone open, press and hold the Side Volume key
down in standby mode. (The screen will display “Silence All.”)
To deactivate, with the phone open, press the Side
Volume key up repeatedly to select a volume level.
Tip:
You can also select
Vibrate All
to set your phone to vibrate only.
4. Your Phone’s Settings 35