Sanyo SCP-6650, Руководство по эксплуатации

Страница: 15 / 55

14
To dial or save phone numbers with pauses:
1. Enter the phone number and press Options (right softkey).
2. Select either Hard Pause or 2-Sec. Pause . Hard Pauses are displayed as a “P” and
2-second pauses as a “T”.
3. Enter additional numbers.
4. To dial the number, press TALK . (When dialing a number with a hard pause, press TALK
to send the next set of numbers.)
or -
To save the number in your Contacts list, press
Options (right softkey) > Save Phone# ,.
Using Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. It allows you to dial a number by entering the last
four or five digits of any number in your Contacts directory. This feature becomes available
when you enable Abbreviated Dialing and program a five-or six- digit prefix you wish to use for
abbreviated dialing. (See “Setting Abbreviated Dialing” on page 22.)
To place a call using Abbreviated Dialing:
1. Enter the last four or five digits of the prefix phone number.
2. Press TALK.
Note : If there are more than two matched numbers in your Contacts list, the Abbrev. Dial list will
be displayed; select the correct entry and press TALK again. If there is no matched number,
your phone dials the number you set for abbreviated dial with the last 4-digits you entered.
Dialing From the Contacts Directory
1. Select MENU/OK > Contacts > Find/Add Entry .
Shortcut : Press the navigation key right to list entries.
2. Use your navigation key to scroll through the Contacts list, highlight your desired entry, and
press MENU/OK.
3. Highlight the number you want to call.
4. Press
Options (right softkey)> Call or Call:Speaker On .
Tip : You can also make a call by pressing TALK during step 4 above.
Using Speed Dialing
With this feature, you can dial your favorite entries using one key press for location 2-9.
To use speed dial for voice calls:
From standby mode, press and hold the appropriate key for approximately two seconds.
- or -
From standby mode, press the appropriate key and press TALK.