Operation with the Remote Control Unit (continued)
•
To change the temperature setting, press the temperature setting
buttons and change the setting to the desired temperature.
Press TEMP. to change the temperature setting.
NOTE
•
The temperature setting changes by one degree each time one of
the TEMP. setting buttons is pressed. The temperature setting may
be changed within a range of
±
4 °C of the standard temperature.
(The temperature display changes back to the room temperature
display three seconds after the temperature has been changed.
However, the air conditioner remembers the new temperature
setting even when it is turned off.)
•
The type of operation and the temperature setting will differ
depending on the ambient temperature when operation starts, as
follows:
Operation type
Temperature
setting (Standard)
Operation
lamp
Cooling
27 °C
Green
Dry
Temperature when operation
starts (20 to 26 °C)
Orange
Heating
24 °C
Red
•
The temperature sensor of the indoor/outdoor unit automatically
selects cooling, heating, or drying operation.
(If you stop the air conditioner and then restart it within four hours,
the air conditioner operates in the same mode as before.)
•
The operation mode (cooling, heating, dry) does not change
automatically during operation.
•
Although the fan speed is set automatically, you can change the fan
speed by pressing the FAN SPEED selector button.
To stop the air conditioner, press the ON/OFF operation button again.
To raise the temperature
setting
To lower the temperature
setting
Outdoor
temperature
Approx. 22 °C
Approx. 20 °C
Approx. 18 °C
Heating operation
Drying
operation
Temperature when
operation starts
(20 to 26 °C)
Temperature setting
(standard)
Indoor temperature
Cooling operation
27 °C
24 °C
Approx.
15 °C
Approx.
22 °C
Approx.
27 °C
18
OI-275-18EG
OI275000
