10
3. Adjusting the Fan Speed
A. Automatic fan speed
Simply set the FAN SPEED selector button to the
position.
This automatically sets the best fan speed for the room
temperature.
B. Manual fan speed
If you want to adjust fan speed manually during operation,
just set the FAN SPEED selector button as desired. [
,
, or
]
4. Fan Only
5. Night Setback Mode
Night Setback Mode is used for saving energy.
Press the NIGHT SETBACK button while operation.
The
mark appears in the display.
To release the night setback function, press the NIGHT SETBACK
button again.
A. In Cooling and DRY Mode: (
and )
B. In Heating Mode: (
)
6. QUIET Mode
QUIET Mode is used to reduce the fan sound of the indoor unit.
Press the QUIET button.
The
mark appears in the display.
To cancel, press QUIET button again.
• In QUIET Mode, the fan rotates at a slower speed than the fan
speed setting.
• If the unit is already operating with a very low airflow, the fan
sound may not change even if the QUIET button is pressed.
If you want to circulate air without any temperature
control, follow these steps:
STEP 1
Press the MODE selector button to switch
to the fan mode
.
STEP 2
Press the ON/OFF operation button.
STEP 3
Press the FAN SPEED selector button to
select the fan speed of your choice (
,
or
).
STEP 2
STEP 1
STEP 3
When the night setback mode is selected, the air conditioner
automatically raises the temperature setting 1 °C when 30
minutes have passed after the selection was made, and then
another 1 °C after another 30 minutes have passed, regardless
of the indoor temperature when night setback was selected.
This enables you to save energy without sacrificing comfort.
This function is convenient when gentle cooling is needed.
Setting
temperature
Press the NIGHT
SETBACK button
30 min.
30 min.
Time
1 °C (2 °F)
1 °C (2 °F)
When the night setback mode is selected, the air conditioner
automatically lowers the temperature setting 2 °C when 30
minutes have passed after the selection was made, and then
another 2 °C after another 30 minutes have passed, regardless
of the indoor temperature when night setback was selected.
This enables you to save energy without sacrificing comfort.
This function is convenient when gentle heating is needed.
Setting
temperature
Press the NIGHT
SETBACK button
30 min.
30 min.
Time
2 °C (4 °F)
2 °C (4 °F)
OI-002-10-EG
2column_01_SAP-KRV96EH_EN.fm Page 10 Wednesday, July 18, 2007 5:32 PM
