Sanyo S1 Sprint, Руководство пользователя

Страница: 19 / 218

Section 1A: Setting Up Service 3
Setting Up Your Phone
1.
Install the battery (if necessary).
䡲
Slide the battery release latch and then slide the
battery cover and remove it from the back of the
phone.
䡲
Insert the battery into the opening, making sure the
connectors align. Gently press down to secure the
battery.
䡲
Replace the battery cover and slide it until you hear a
click. Then, slide the battery release latch.
(See “Installing the Battery”on page 23 for the
illustration.)
2.
Press and hold to turn the phone on.
䡲
Your phone will turn on, search for Sprint service,
and enter standby mode.
䡲
If your phone is not yet activated, or if it is locked, see
“Getting Started With Sprint Service”on the
following page for more information.
3.
Make your first call.
䡲
Use your keypad to enter a phone number.
䡲
Press .
Note: Your phone’s battery should have enough charge to turn on,
find a signal, set up your voicemail, and make a call. You
should fully charge your battery as soon as possible. See
“Charging the Battery”on page 24 for details.
Setting Up Ser
vice