7
F11
F9
F10
Ensemble/Multiplex(Group name)
Time/Date
Signal strength
DLS
Audio Bit Rate
Programme Type
Frequency
Secondary services
On some occasions you will see a “>” symbol directly after the name of the station, this indicates that
there are secondary services available to that station. These secondary services contain extra
services that relate to the primary station. E.g. a sports station may want to add extra commentaries.
The secondary services are inserted directly after the primary station. To select the secondary station,
press the
SELECT
button.
FM radio
1. To select FM, press the
DAB+/FM
button, the display will show FM and the frequency.
2.
To activate auto search, press and hold the
JOG MODE/SELECT
button until it starts to scan the
frequency band, the display will show “Searching …”, and it will stop automatically once a station
has been found. (F. 9)
3.
To activate manual search, first press the
JOG MODE/SELECT
button once, and when the
display shows “<Tuning>”, rotate the
VOLUME/SCROLL
control until you read the correct
frequency or the reception is at its best.
4.
To select audio mode, press the
MENU
button to toggle between the “Auto” or “Mono” selection.
Note:
The radio will automatically switch between stereo and mono mode, but you can override this
and switch this function manually which is helpful for poor signal reception.
In either DAB or FM mode, you can store up to 10 stations to the presets memory; this will enable you
to get direct access to your favourite stations.
1. To store a preset, first tune to your desired station, then press and hold the
PRESET
button until
the display shows “Empty preset #”, and the preset number will flash. (F. 10)
2. Release the
PRESET
button and rotate the
VOLUME/SCROLL
control to select your desired
station preset number, then press the
SELECT
button to confirm your selection, the display will
show “Preset # saved”. (F. 11)
3.
To recall a preset station, first press the
PRESET
button once, then rotate the
VOLUME/SCROLL
control to scroll up or down the presets that you have stored. When the display shows your
desired preset number, release the control. If the preset hasn't been allocated a station, the
display will show “Empty preset #”.
Every time you press the
INFO
button, the display will cycle through the following display modes:
Time and date
The time and date will be automatically updated by the broadcasted information; it is no need to set
the clock manually. In the unlikely event that no clock information is received, the display will show
“<TIME/DATE>”.
Frequency
The frequency of the present station will be displayed.
Audio bit rate
The display will show the digital audio bit rate being received.
Signal strength
The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer the
bar will be from left to right.
STORING AND RECALLING STORED STATIONS
DAB DISPLAY MODES
