13
12
14
15
11
2
3
4
5
1
6
7
8
9
10
4
1. SPEAKER
2. ALARM 1 BUTTON
3. ALARM 2 BUTTON
4. SLEEP BUTTON
5. STANDBY/ON BUTTON
6. MENU BUTTON
7. PRESET BUTTON
8. INFO BUTTON
9. DAB+/FM BUTTON
10. SNOOZE BUTTON
11. LCD DISPLAY
12. VOLUME/SCROLL CONTROL
13. JOG MODE/SELECT BUTTON
14. ANTENNA
15. AC POWER CORD
FEATURES AND CONTROLS
OPERATING THE UNIT
Before operating the unit for the first time, make sure the AC power cord is properly connected to a
240V 50Hz AC outlet, then you can now press the STANDBY/ON button to switch the unit ON. Pull the
AC plug out of the wall socket if you want to switch off completely.
CLOCK SETTING
ALARM FUNCTION
When the radio is connected to the AC power for the first time, it will be in standby mode. The display
backlight will be on for a few seconds and the clock will be finally displayed. Press the
STANDBY/ON
button once to turn the radio on, it will then automatically enter into the DAB mode and perform auto
scan function, after the scan has finished, the first alphanumerically found station will be
automatically selected. The clock will then be synchronized to the current local time in a few seconds.
Manual clock setting is not required.
This unit incorporates an identical Dual Alarm function. You can have two individual alarm wake-up
time and wake-up mode settings to wake you to an electronic buzzer tone or your favourite radio
station (DAB/FM).
Setting the alarm time and wake-up mode
1. Depress and hold the
ALARM
button (
1
or
2
) until the display shows “Alarm Setting”.
2. Rotate the
VOLUME/SCROLL
control followed by pressing the
SELECT
button to adjust and
confirm your desired alarm time - first set the hour and then the minute. (F. 1)
3. After the confirmation of the minute setting, the alarm time is set and you will enter into the wake-
up mode settings.
