Sanyo QuaDrive PLC-HF15000L, Руководство по обслуживанию, Страница: 178 / 312

-178-
Troubleshooting
error
error
code
error Infomation
(See Powe Failure Detection Tree)
error
code
error Infomation
(See Powe Failure Detection Tree)
Normal 0 -
Power Failure
1000 AV, AV 1018 DC, FAN4
1001 MOTHR, MOTHER 1019 DC, FAN5
100 MAIN, AD 100 DC, FAN9
1003 MAIN, F FPGA 101 DC, FAN8
1004 MAIN, TH 10 DC, FAN7
1005 MAIN, PIC 103 DC, FAN6
1006 RS3C, LAN 104 ERR, PRESSURE
1007 MAIN, 5V 105 ERR, FIL_DET
1008 MAIN, I/O 106 ERR, FIL_MTR
1009 MAIN, S16V 107 ERR, SHUT_MTR
1010 MAIN, S3.3V 108 PFC. PFC1
1011 MAIN, S1V 109 PFC. PFC
101 MAIN, KEYSTONE 1030 PFC. PFC3
1013 MAIN, GAMMA 1031 PFC. PFC4
1014 MAIN, S-5V 103 ERR, IIC_DATA
1015 MAIN, S5V 1033 SLOT3,
1016 DC, FAN1 1034 SLOT4,
1017 DC, FAN+3
Temperature Error
000 Temperature Error detected on the Sensor (IC8811) (Arround the Intake Duct)
001 Error of the detection (IC8811 communication error)
101 Error of the detection (IC8851 communication error)
00 Temperature Error detected on the Sensors (IC8811, IC8851) (Temp. error between internal and external)
Lamp Error
3000 Lamp1 fails on
3001 Lamp1 goes out
300 Communication Error on Lamp1
3100 Lamp fails on
3101 Lamp goes out
310 Communication Error on Lamp
300 Lamp3 fails on
301 Lamp3 goes out
30 Communication Error on Lamp3
3300 Lamp4 fails on
3301 Lamp4 goes out
330 Communication Error on Lamp4
System Error
4000 Config Error (FPGA, AV, Mother, Ye)
4001 Config Error (FPGA SW, LVDS)
Filter Error 6000 Clogged filter
Error history log
This projector provides the error history log function. To
check the logs, you need to enter the service mode and
select Group No. "
220
" and Item No. "
0
" to "
49
". The error
code is displayed on the Data column. The description of
the error code is listed on the table below.
* How to enter the service mode and select the group, item
and data value, see "Service Adjustment Menu Opera-
tion".
Group
No.
Item
No.
Data
(Error Code)
91 0
1
3
:
:
49
✻
<- Latest Error
✻
✻
✻
:
:
✻
How to reset the error history log
1. Enter the Service Mode, and select Group No. "
220
" and Item No. "
50
".
The history log will be reset when the Data Value is set to "
10
". The value automatically returns to "0".
* How to enter the service mode and select the group, item and data value, see "Service adjustment menu operation".