manualshive.com logo in svg

Sanyo POA-MD13NET2, Руководство пользователя, Страница: 117 / 176

Поделиться
Скачать
Sanyo POA-MD13NET2 Скачать руководство пользователя страница 117

29

Network Board

OWNER’S MANUAL

ENGLISH

E-Main Setting

*1 The SMTP server is a server for sending E-mail. Please contact your network administrator to

have this SMTP server address.

✐

To use the E-mail function, it must be set the DNS address on the Network Setting page correctly.

✐

You cannot use this E-mail function if the DNS server and SMTP server cannot be used in
your network environment. If the SMTP server is located in your LAN (Local Area network),
the address set to SMTP server should be specified in the SMTP server located in your LAN.
The server located outside of your LAN may not be available for security reason. For further
information please contact your network administrator.

✐

Up to 10 e-mail addresses can be registered.

3 

Condition selection for sending alert message

Click on the 

Option

linked text. Check the

condition items under which alert mes-
sages will be sent and press
the 

Set

button.

Please refer to chapter
“Examples :Type and con-
tents of alert messages”
described on the next page.

Содержание POA-MD13NET2

















































































































































































Отзывы:

Нет отзывов