29
Image Adjustment
Lamp control
This function allows you to change the brightness of the screen.
Use the Point
7 8
buttons to select the desired lamp mode. You
can also select the lamp mode by pressing the LAMP CONTROL
button on the remote control.
Normal . . . . . Normal brightness.
Auto 1 . . . . . The brightness according to the input signal.
Auto 2 . . . . . Less bright and lower-sound than Auto 1.
Eco . . . . . . . Lower brightness reduces the lamp lower
consumption.
The lamp mode is automatically switched to the Eco mode under
no signal input.
Use the Point
7 8
buttons to adjust the gamma value to obtain a
better balance of contrast. (From -7 to +7.)
Gamma
Press the Point
7
button to decrease the sharpness of the image;
press the Point
8
button to increase the sharpness of the image.
(From -7 to +7.)
Sharpness
An interlaced video signal can be displayed in progressive. Use the
Point
7 8
buttons to select the desired mode.
Off . . . . . Disabled.
L1 . . . . . Select “L1” for moving pictures.
L2 . . . . . Select “L2” for still pictures.
Film . . . . Select “Film” for watching a film. With this function,
the projector reproduce pictures faithful to the original
film quality; it operates on 3-2 and 2-2 pulldown video
sources.
Progressive
Lens iris
Use the Point
7 8
buttons to adjust the lens iris. It can be stopped
down from zero. (From 0 to -63.)
Press the Point
7
button to lighten red tone; press the Point
8
button to deepen red tone. (From -31 to +31.)
White balance (Red)
Press the Point
7
button to lighten green tone; press the Point
8
button to deepen green tone. (From -31 to +31.)
White balance (Green)
Press the Point
7
button to lighten blue tone; press the Point
8
button to deepen blue tone. (From -31 to +31.)
White balance (Blue)
✔
Note:
• If any of the White balance (Red, Green or Blue) is adjusted, the Color temp. level
will change to “User”.
• Progressive cannot be selected with the computer input and when the video signal
format is 480p, 575p, or 720p.
• The Film mode in the Progressive function cannot be selected when the video signal
format is 1080i. If you select the Film mode when the video signal format is 480i
and then input 1080i signal, it will switch to the L1 mode.
Press the Point
8
or OK
buttons to display the
Advanced menu.
Go on to the next page...
Press the Point
d
button
to move on to the next
items.
