42
Setting
Ceiling
Rear
Mounting
This function is used to select the way of setting the projector.
Off
···· Cancels the selected way of setting
Ceiling
···· Used to project the image from a ceiling mounting the
projector. The picture is top/bottom and left/right
reversed.
Wall
···· Used to project the image from a wall-hanging projector.
The picture is top/bottom reversed.
Rear
When this function is “On,” the picture is left/right reversed. This
function is used to project the image to a rear projection screen.
Capture
This function is used to capture the image being projected and use it
for a starting-up display or interval of presentations. After capturing
the projected image, go to the Logo function and set it as “User”.
Then the captured image will be displayed when turning on the
projector next time or pressing the MY PICTURE (MY-P) button on the
remote control. (p11)
To capture the image, select [Yes]. To cancel the Capture function,
select [No]. To stop capturing in the middle, press CANCEL button.
Capture
NOTE
●
A signal from a computer can be captured up to XGA(1024 x 768). If
selecting 1280 x 1024 at Display area in the PC Adjust Menu (p36), then the
image cannot be captured.
●
A signal from video equipment can be captured except for 720p, 1035i,
1080i.
●
When capturing the image that has been adjusted by the Keystone function,
the adjustment data is automatically reset and the projector captures an
image without keystone adjustment.
●
If the Capture function fails to capture an image or cancel to capture in the
middle, the On-Screen Menu returns to the Capture item.
●
If capturing a signal which is not able to be captured, an exclamation mark
appears and the function will not be available.
●
When you change the Image Level, the Image Level of MY PICTURE also
changes from which it was captured .
Logo
This function decides what to be displayed when starting up.
Off
···· count-down only
Default ···· the factory-set logo
User
···· the image you captured
Advanced menu
When this function is On, Advanced menu in Image level adjustment
(both Video and computer input) can be selected. See Image level
adjustment (p.29,39) for details.
Wall
Mounting
