Sanyo PLV-55WM1, Руководство по обслуживанию

Страница: 63 / 152

- 63 -
■
Electrical Adjustments
To enter the service mode
To enter the “Service Mode”, press and hold the MENU and INPUT button on the LCD Projection Monitor at the
same time for more than 3 seconds, or press and hold the MENU button on the remote control unit for more than
20 seconds. The service menu appears on the screen as follows.
To adjust service data
Select the adjustment item no. by pressing the point UP or DOWN button , and change the data value by pressing
the point LEFT or RIGHT button . Refer to the “Service Adjustment Data Table” for further description of adjust-
ment item no. and data value.
To exit the service mode
To exit the service mode, press the POWER ON-OFF button on the LCD Projection Monitor or the remote control
unit.
●
Service Adjustment Menu Operation
TempA TempB
SANYO 100
Computer
Fan1 Speed Fan2 Speed Fan3 Speed
23.45
123 70
34.56
80 60 80
Service Mode
WER
LAMP
REPLACE WARNING
INPUT VOLUME
MENU SELECT
d e
+
7 8
DIO—R
Data value
Item No.
Input Mode
Version No.
Note :
This part of display is available at the service mode No.106 - 161.
LL
LAMP
MENU
SCREEN
SELECT
LAMP
CONTROL
AUTO PC
FREEZE
+
Remote Control Front Control
ote :
pla
●
erv ce A Adju ustmen Menu Operatio
—
IN NPUT T
T LECT