Sanyo PLV-55WM1, Руководство по обслуживанию

Страница: 14 / 152

Installation
Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked
or covered.
●
Take appropriate space on the top, sides and rear of the
LCD Projection Monitor cabinet for allowing air circulation
and cooling the LCD Projection Monitor. Minimum
distance should be taken. If the projector is to be built
into a compartment or similarly enclosed, the minimum
distances must be maintained. Do not cover the
ventilation slot on the LCD Projection Monitor. Heat
build-up can reduce the service life of your LCD
Projection Monitor, and can also be dangerous.
Air Circulation
Placing and Settling the LCD Projection Monitor
BE SURE TO USE OR PLACE THE LCD
PROJECTION MONITOR IN THE
TEMPERATURE INDICATED BELOW:
Place the LCD Projection Monitor on flat places or with an
exclusive LCD Projection Monitor stand. Placing on unflat
places may cause picture tilt or distortion.
Do not place the LCD Projection Monitor under direct sun-
light. This may have a damaging effect on picture quality
and the screen surface of the LCD Projection Monitor.
41°F ~ 95°F(5°C ~ 35°C)
14°F ~ 140°F(–10°C ~ 60°C)
Operating Temperature
Storage Temperature
(10cm)
0.3'
0.6'
0.6'
0.3'
0.6'
(20cm) (20cm)
(20cm)
(10cm)
- 14 -
CAUTION;
When placing the LCD Projection Monitor, the
spaces for ventilation must be maintained.
SIDE and TOP
FRONT and REAR
. This
the sc
s may
creen s
s y h have
surfac
y y
of
maging
e LCD
e
P
fect
oject
on pic
on M
cture
onito
qualit
Placin ng and n Settling th LCD Proj tion Mon or
Circ irc cul ul a a a