Computer Input
Computer Input
3
Store
Exit the Image Adjust Menu.
Quit
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with
the Point
▲▼
buttons and press the SELECT button. A
confirmation box appears and then select [Yes].
Stored data can be called up by selecting "Image" in
the Image Level Selection on page 30.
This projector has the picture screen resize function, which enables you to customize the image
size.
Press the MENU button to display the On-Screen
Menu. Press the Point
◄►
buttons to move the red
framed pointer to the Screen Menu icon.
Press the Point
▲▼
buttons and move the red
framed pointer to the function that you want to
select and then press the SELECT button.
2
Screen Size Adjustment
Provide the image to fit the screen size.
Normal
True
Provide the image in its original size. When the original
image size is larger than the screen size (104 x 768 ),
this projector enters panning mode automatically. Pan
the image with Point
▲▼◄►
buttons. When adjusted,
the arrows turns red. When reached to the correction
limit, the arrows disappears.
1
Wide
Provide the image to fit wide video aspect ratio (16:9)
by expanding the image width uniformly. This function
can be used for providing a squeezed video signal at
16:9.
Full
Provide the full screen image.
Move the red framed
pointer to any of
Image 1 to 4 where
you want to set
and then press the
SELECT button.
The confirmation
box appears,
then select [Yes].
Store item
Press the SELECT
button at this item to
store the adjusted data.
Move the red framed pointer
to the function and press the
SELECT button.
Screen Menu
Screen Menu icon
Note:
• This Screen Menu cannot be
operated when 70p(HDTV), 1035i
(HDTV), or 1080i (HDTV) is selected
in the PC System Menu (p.6).
• The projector cannot display any
resolution higher than 1600x100.
If your computer’s screen resolution
is higher than it, reset the resolution
to the lower before connecting to the
projector.
• The image data in other than XGA
(104x768) is modified to fit the
screen size in initial mode.
• True, Full, and Digital zoom +/–
cannot be selected when 480i, 575i,
480p, or 575p is selected in the PC
System Menu (p.6).
