Sanyo PLC-XU56, Руководство по обслуживанию

Страница: 29 / 116

-29-
30 Real/Cinema GAMMA 14 462/502 462/506 0 ~ 1023
31 Real/Cinema GAMMA 15 469/502 512/512 0 ~ 1023
Group 100 H8 Option
0 Lamp Time Monitor 0~8738 Read Only
1 RS232C Baudrate 0 0 ~ 1 0: 19200bps1: 9600bps
2
3
Cooling Time L1 3 1 ~ 15 Fan Mode L1 Cooling time1:30 sec.3:90 sec.15:450 sec.(change in 30 sec. steps)
4 Hi-Land SW 0 0 ~ 3 0: Normal Mode1~3: High-Land Mode 1-3
5
6
Lamp Total Time 0~65535 Read only
7 Lamp Dim level (Eco) 0 0 ~ 15
8
9
Reset SW 0 ~ 10 Resets User Setting data when this value is set to 10
10 Color Shading SW 1 0 ~ 1 0:Color Compensation Off, 1:Color Compensation On
11 RC Enable/Disable 0 0 ~ 3 0:Enable 1:Disable
12 Lamp Dim Level 10/12/15 0 ~ 15 SU51 10: 160W 12: 200W / XU51 10: 150W, 12: 200W / XU56 : 15
13 Lamp Warning Time 0~65535
14
15
Video Mute Forced Off 0 ~ 1 0:VideoMuteOn(Normal) 1:Video Mute Forced Off
16 Safety FAN Control Fix SW 0 0 ~ 5 0:Normal 1:Normal Min2:Normal Max3:Eco Min4:Eco Max
17 HDCP Option 0 0 ~ 1 0: use DDC data of DVI 1: use DDC data of HDCP
18 HDCP Reset 0 0 ~ 10 Write EDID data for HDCP when the value becomes 10.
19
20
Coooling Time L2 1 1 ~ 15 Fan Mode L2 Cooling time1:30 sec.3:90 sec.15:450 sec.(change in 30 sec. steps)
Group: 101PW Option
0 Shootout Mode 0 0 ~ 1 1: Shoot Out Mode Enable0: Disable
1 V-Sync SW 0 0 ~ 1 0: No Sync 1: Sync with Vertical sync
2 NOBRAND 0 0 ~ 1 0:Normal1:NOBRAND
3
4
HDCP OverScan Rate 0 0 ~ 5
Group 103 Auto Keystone
0 Offset 0 -1053 ~ 1056 Offset (1/64 degree) display
1 Offset Switch 0 0 ~ 1 0: Offset display (Normal) 1: Offset display (Calibration error)
2 Debug Mode 0 0 ~ 1 0: No diaplay 1: Angle(0.5 degree)
3 Service Calibration 0 0 ~ 5 When value is set to 5, the auto-setup is performed.
4 Lock Count 5 1 ~ 255 Calibration times
5 Delta Vart Result 19 1 ~ 255 Threshold of calibration
6 Angle 1 Count 1 0 ~ 10 Caluculate times (No6 x No7)
7 Angle 2 Count 5 0 ~ 10 Caluculate times (No6 x No7)
8 Bli
n
d Sector 1 160 0 ~ 1024 No sens band 1 (in 1/64 degree), data converted to 0
9 Blind Sector 2 32 0 ~ 1024 No sens band 2 (in 1/64 degree), data converted to value of No. 10.
10 Blind Sector Bias 61 0 ~ 1024 Bias (in 1/64 degree).
Group: 110 Dimmer Processing
0 DIMMER_CTRL_LEVEL1 7 0~255 Dimmer Brightness Level1 Data: Dimmer Level1 when less than this value.
1 DIMMER_CTRL_LEVEL2 14 0~255 Dimmer Brightness Level2 Data: Dimmer Level2 when less than this value.
2 DIMMER_CTRL_LEVEL3 21 0~255 Dimmer Brightness Level3 Data: Dimmer Level3 when less than this value.
3 DIMMER_CTRL_LEVEL4 28 0~255 Dimmer Brightness Level4 Data: Dimmer Level4 when less than this value.
4 DIMMER_CTRL_LEVEL5 35 0~255 Dimmer Brightness Level5 Data: Dimmer Level5 when less than this value.
5 DIMMER_CTRL_LEVEL6 42 0~255 Dimmer Brightness Level6 Data: Dimmer Level6 when less than this value.
6 DIMMER_CTRL_LEVEL7 49 0~255 Dimmer Brightness Level7 Data: Dimmer Level7 when less than this value.
7 DIMMER_CTRL_LEVEL8 56 0~255 Dimmer Brightness Level8 Data: Dimmer Level8 when less than this value.
8 DIMMER_CTRL_LEVEL9 63 0~255 Dimmer Brightness Level9 Data: Dimmer Level9 when less than this value.
9 DIMMER_CTRL_LEVEL10 70 0~255 Dimmer Brightness Level10 Data: Dimmer Level10 when less than this value.
10 DIMMER_CTRL_LEVEL11 77 0~255 Dimmer Brightness Level11 Data: Dimmer Level11 when less than this value.
11 DIMMER_CTRL_LEVEL12 84 0~255 Dimmer Brightness Level12 Data: Dimmer Level12 when less than this value.
12 DIMMER_CTRL_LEVEL13 91 0~255 Dimmer Brightness Level13 Data: Dimmer Level13 when less than this value.
13 DIMMER_CTRL_LEVEL14 98 0~255 Dimmer Brightness Level14 Data: Dimmer Level14 when less than this value.
14 DIMMER_CTRL_LEVEL15 105 0~255 Dimmer Brightness Level15 Data: Dimmer Level15 when less than this value.
15 DIMMER_AVERAGE_POINT 4 1 ~ 16 Average count for Dimmer Brightness Data
16 DIMMER_AVERAGE_DATA - 0 ~ 255 Average Value for Dimmer Brightness Data * Read Only(8 bit)
17 DIMMER_LEVEL_AUTO - 0 ~ 15 Dimmer Level effective in auto-dimmer mode. 0 fixed other than auto mode (Read Only)
18 DIMMER_LEVEL_NONAUTO - 0 ~ 15 Dimmer Level effective other than auto-dimmer mode
Group: 111 Fan Control
0 FAN_TEMP_A_WARNING 72/74 30 ~ 100 Temperature A to judge the abnormal temperature, for surrounding temperature SU51/XU51,XU56
1 FAN_TEMP_B_WARNING 59/58 30 ~ 100 Temperature B to judge the abnormal temperature, for Panels SU51/XU51,XU56
2 FAN_TEMP_C_WARNING 71/73 30 ~ 100 Temperature C to judge the abnormal temperature, for Lamp SU51/XU51,XU56
3 FAN_TEMP_B-A_WARNING 100 0 ~ 100 Temperature B-A to judge the abnormal temperature, for detecting clogged filter
4 FAN_TEMP_C-A_WARNING 100 0 ~ 100 Temperature C-A to judge the abnormal temperature, for detecting clogged filter
5 FAN_CONTROL_SW 0 0 or 1 0: Auto Fan Control 1:Manual Control
6 FAN_1_SPEED_CTRL 135 0 ~ 255 Manual Adjustment Mode when FAN_CONTROL_SW=1
7 FAN_2_SPEED_CTRL 135 0 ~ 255
8
9
FAN_1_SPEED_MONI - 0 ~ 255 Fan Speed Monitor when FAN_CONTROL_SW=0, Read Only
10 FAN_2_SPEED_MONI - 0 ~ 255
11
12
FAN_TEMP_A_MONI - - Read Only
13 FAN_TEMP_B_MONI - -
14 FAN_TEMP_C_MONI - -
15
No. Adjustment Item Initial Value Range Input source / Description
Electrical Adjustments