Sanyo PLC-XU45, Руководство пользователя

Страница: 15 / 48

15
BEFORE OPERATION
To insure safe operation, please observe the following precautions :
●
Use (2) AA, UM3 or R06 type alkaline batteries.
●
Replace two batteries at the same time.
●
Do not use a new battery with a used battery.
●
Avoid contact with water or liquid.
●
Do not expose the Remote Control to moisture, or heat.
●
Do not drop the Remote Control.
●
If a battery has leaked on Remote Control, carefully wipe case clean and install new batteries.
●
Risk of explosion if battery is replaced by an incorrect type.
●
Dispose of used batteries according to the instructions.
Press the lid down-
ward and slide it.
Remove the battery
compartment lid. Slide the batteries into
the compartment. Replace the compartment
lid.
Two AA size batteries
For correct polarity (+
and –), be sure the
battery terminals are in
contact with the pins in
the compartment.
REMOTE CONTROL BATTERIES INSTALLATION
1 2 3
Operating Range
Point the Remote Control toward
projector (Infrared Remote
Receiver) whenever pressing any
button. Maximum operating range
for Remote Control is about 16.4’
(5m) and 60° in front and rear of the
projector.
16.4’
(5 m)
60°
16.4’
(5 m)
Used to adjust zoom.
(P20)
VOLUME
ON-OFF
FOCUS ZOOM
D.ZOOM
MENU
MUTE
LASER
NO SHOW FREEZE
AUTO PC ADJ. IMAGE
P-TIMER
LOCK
INPUT
KEYSTONE
MUTE BUTTON
Used to mute sound.(P21)
ZOOM BUTTON
FOCUS BUTTON
Used to adjust focus.
(P20)
NO SHOW BUTTON
Used to turn the picture
into black image. (P21)
AUTO PC ADJ. BUTTON
Used to operate AUTO PC
Adjustment function. (P23)
VOLUME BUTTON
Used to adjust volume.
(P21)
D.ZOOM BUTTON
Used to select DIGITAL
ZOOM +/– mode and
resize image. (P28)
KEYSTONE BUTTON
Used to correct
keystone distortion.
(P20, 34)
FREEZE BUTTON
Used to freeze the picture.
(P20)
IMAGE BUTTON
Used to select image
level. (P26, 31)
60°