Sanyo PLC-XU305 XGA, Руководство пользователя

Страница: 38 / 81

3
Computer Input
Select Digital zoom + . The On-Screen Menu disappears and
D. zoom + appears. Press the SELECT button to expand the
image size. Use the Point
▲▼◄►
buttons to pan the image.
The Panning function can work only when the image is larger
than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM
▲
button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM
▲▼
buttons, SELECT and Point buttons.
Digital zoom +
Select Digital zoom – . The On-Screen Menu disappears
and D. zoom – appears. Press the SELECT button to
compress image size.
The projected image can be also compressed by pressing
the D.ZOOM
▼
button on the remote control.
Digital zoom –
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
29-30) again or adjust the screen size with the D.ZOOM
▲▼
buttons.
For zooming in and out the images

Note:
• The panning function may not operate properly if
the stored Mode in the PC adjust Menu is used
(p.34).
• The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when the
custom is selected for the screen size.
• True , Full , and Digital zoom +/– cannot be
selected when 0i , 55i , 0p or 55p is
selected in the PC System Menu (p.31).
• Digital zoom +/- cannot be selected when Full
or True is selected.
Remote Control
D.ZOOM + button
POINT buttons
SELECT button
D.ZOOM - button
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the title Custom
is displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V ................... When set to On , the aspect ratio is fixed.
Scale V appears dimmed and becomes
unavailable. Adjust Scale H , then the
screen scale is automatically modified
based on the aspect ratio.
Position H/V ..... Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at yes .
When Custom is selected, the saved
scale is used.
Reset ................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at yes .
Custom

Note:
• When no signal is detected, Normal is set automatically and
the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V is
limited depending on the input signal.