Sanyo PLC-XP57L, Руководство по обслуживанию

Страница: 55 / 122

- 55 -
206 NET_SW Switch On/Off for PJ-Net Power L:On, H: Off O
207 GND Power for Inout/Output(0V) - -
208 FPGA_CLB Initialize for circuit H after config. O
209 3.3V Power for Inout/Output(3.3V) - -
210 SYS SW_CPU Bus Switch O
211 IC_RESET_CPU Power Control peripheral ICs O
212 LAMP_SWIN Lamp Drive H: On, L: Off O
213 FAN_DRIVE_CPU Fan Drive O H: On, L: Off O
214 SH_SDA_3V IIC Bus (standby Off) L: Active I/O
215 SH_SCL_3V IIC Bus (standby Off) L: Active I/O
216 SH_SDA_S3V IIC Bus (always On) L: Active I/O
217 SH_SCL_S3V IIC Bus (always On) L: Active I/O
218 PW_SH_0 PW-SH Input Signal I
219 UCLK USB Clock [48MHz] (Pull-up) I
220 RESETP Power On Reset Request L: On reset I
221 (Not used) (Pull-up) -
222 MD3 Bus Width Setting for Area0 L fixed I
223 MD4 Bus Width Setting for Area0 L fixed I
224 3.3V Test(3.3V Fixed) - I
225 3.3V USB Analog Power(3.3V) - -
226 (USB1P)[Func] USB1 Data I/O(+) (Open) I/O
227 (USB1M)[Func] USB1 Data I/O(-) (Open) I/O
228 GND USB Analog Power (0V) - -
229 (USB2P)[Host] USB2 Data I/O(+) (Open) I/O
230 (USB2M)[Host] USB2 Data I/O(-) (Open) I/O
231 3.3V USB Analog Power(3.3V) - -
232 GND Analog Power (0V) - -
233 PRESS_SENS Input for Pressure Sensor Analog Input AI
234 ACCELE_SENS Input for Acceleration Sensor Analog Input AI
235 KEY1 KEY AD Converter Input Analog Input AI
236 KEY2 KEY AD Converter Input Analog Input AI
237 3.3V Analog Power(3.3V) - -
238 KEY3 KEY AD Converter Input Analog Input AI
239 OPT1 Option Input Analog Input AI
240 GND Analog Power (0V) - -
Pin No. Function Name Function Polarity I/O
Control Port Functions