Sanyo PLC-XP100L, Руководство по обслуживанию

Страница: 77 / 156

-77-
Chassis Description
error error code
error Infomation
(See Powe Failure Detection Tree)
Normal 0 -
Power Failure
1000 PJNET, S5V
1001 AV, S-5V
100 AV, S5V
1003 MAIN, S-5V
1004 M/A, 9V
1005 FAN, 16V
1006 SWFPGA1, 1.V
1007 SWFPGA1, .5V
1008 VDEC, 1.8V
1009 FPGA, 1.5V
1010 MAIN, 6V
1011 MAIN, 3.3V
101 ANALOG, 3.3V
1013 VDEC, 3.3V
1014 GAMMA, 1.8V
1015 GAMMA, .5V
1016 GAMMA, 3.3V
1017 GAMMA, 13.5V
1018 LAMP FAN, 16V
1019 LENS, 9V
100 LENS, 15V
101 SWFPGA, CONFIG
10 FPGA, CONFIG
103 PW, DPORT OUT
104 FILTER DET
105 MOTOR, TIMEOUT
106 PRESS, ERROR
Temperature Error
000 Sensor A detects abnormal temperature. (IC1816)
001 Sensor A fails measurement. (IC1806)
100 Sensor B detects abnormal temperature. (IC1814)
101 Sensor B fails measurement. (IC1814)
10 Sensors B-A temperature error.
00 Sensor C detects abnormal temperature. (IC169)
01 Sensor C fails measurement. (IC169)
0 Sensors C-A temperature error.
Lamp Error
3000 Lamp1 fails on
3001 Lamp1 goes out
300 Communication Error on Lamp1
Filter Error
4000 Air Filter is not installed
4001 Wind Sensor Error
400 Filter Scroll Motor Error
Error History Log
This projector provides the error history log function. To
check the logs, you need to enter the service mode and se-
lect Group No. "91" and Item No. "0" to "49". The error code
is displayed on the Data column. The description of the error
code is listed on the table below.
* How to enter the service mode and select the group, item
and data value, see "Service Adjustment Menu Opera-
tion".
Group
No.
Item
No.
Data
(Error Code)
91 0
1
3
:
:
49
✻
<- Latest Error
✻
✻
✻
:
:
✻
How to reset the error History Log
1. Enter the Service Mode, and select Group No. "91" and Item No. "50".
The history log will be reset when the Data Value is set to "10". The value automatically returns to "0".
* How to enter the service mode and select the group, item and data value, see "Service Adjustment Menu Operation".