Sanyo PLC-XP100L, Руководство по обслуживанию

Страница: 46 / 156

-46-
Electrical Adjustment
Grp Item Item Name Function Range Initial
0 COOLING_TIME Cooling time at Power Off 10 ~ 120 90
1 Not used Not used -1
80 Projector used time Reset
0 PJ Time Reset Time is reset when the value is set to 10. 0 ~ 10 0
90 Operation history
0 OPERATION_HISTORY_1 Last Operation history 0 ~ 32767 0
~ : : : :
49 OPERATION_HISTORY_50 50th Operation history 0 ~ 32767 0
50 OPERATION_HISTORY Reset History is reset when the value is set to 10. 0 ~ 10 0
91 Error Log * Refer to Error Log table
0 Warning_Log_1 Last Error Log 0 ~ 32767 0
~ : : : :
49 Warning_Log_50 50th Error Log 0 ~ 32767 0
50 Warning_Log Reset Log is reset when the value is set to 10. 0 ~ 10 0
112 Lamp Config
0 Lamp Config Change Lamp Life Select 1000 ~ 8000 2500
113 Lamp Reset Counter [Read only]
0 Lamp Reset times Lamp reset times 0 ~ 127 0
115 Lamp Go Out
0 Lamp Go Out 0:Disable / 1:Enable - 0
116 Lamp Replace Dipsplay
0 Lamp time display 0:Disable / 1:Enable 0/1 1
117 Lamp Life Test
0 Lamp life test enable 0:Disable 1:Enable for Safety check - 0
1 Lmap On time(for life test) Minutes for Safety check - 1
2 Lamp Off time(for life test) Minutes for Safety check - 3
3 Lamp total time(for life test) Hours for Safety check - 0
120 RC KEY Disable
0
1
RC KEY Front/Rear Disable 0:Enable / 1:Front RC Disable / 2:Rear RC Disable / 3:RC KEY All Disable 0 / 1 / 2 / 3 0
2
130 75 ohm terminated
0 TERM_1 Input1(D_SUB)75 ohm terminated ON/OFF (0:OFF 1:ON) 0 / 1 0
1 TERM_2 Input2(BNC)75 ohm terminated ON/OFF (0:OFF 1:ON) 0 / 1 0
140 Fan Adjustment
0 Fan A Max (DAC) Fan DAC Output adjustment 0 ~ 255 224
1 Fan A Min (DAC) * Lamp Mode : Forced Eco 0 ~ 255 38
2 Fan B Max (DAC) 0 ~ 255 225
3 Fan B Min (DAC) Volmin=5V 0 ~ 255 36
4 Fan C Max (DAC) Volmax=13.8V 0 ~ 255 229
5 Fan C Min (DAC) (DACmax - DACmin) / (Volmax - Volmin) * (Volnow - Volmin) + DACmin 0 ~ 255 35
6 Fan D Max (DAC) 0 ~ 255 227
7 Fan D Min (DAC) 0 ~ 255 38
8 Fan E Max (DAC) 0 ~ 255 222
9 Fan E Min (DAC) 0 ~ 255 36
10 Fan F Max (DAC) 0 ~ 255 222
11 Fan F Min (DAC) 0 ~ 255 38
141 Fan Option
142 Fan Temp Error Setting [Read only} Read only
0 Temp A Warning Temp. A (Room) to judge for abnormal temp (x0.1°C) 0 ~ 1000 470
1 Temp B Warning Temp. A (Lamp) to judge for abnormal temp (x0.1°C) 0 ~ 1000 750
2 Temp C Warning Temp. A (Panel) to judge for abnormal temp (x0.1°C) 300 ~ 1000 650
3 Temp B-A Warning Temp. B-A (Filter Clogged) to judge for abnormal temp (x0.1°C) 0 ~ 1000 500
4 Temp C-A Warning Temp. C-A (Filter Clogged) to judge for abnormal temp (x0.1°C) 0 ~ 1000 310