Sanyo PLC-XM100, Руководство по обслуживанию

Страница: 82 / 170

-8-
Troubleshooting
error error code
error Infomation
(See Powe Failure Detection System)
error code
error Infomation
(See Powe Failure Detection System)
Normal 0 -
Power Failure
1000 AD, 3.3V 1017 FILTER, 1V
1001 KS, 3.3V 1018 AV, S-6V
100 KS, .5V 1019 FN904, 13V
1003 KS, 1.8V 100 FN90, 13V
1004 GAMMA, 3.3V 101 FN901, 13V
1005 GAMMA, .5V 10 FN905, 13V
1006 GAMMA, 1.8V 103 FN906&7&8, 13V
1007 DVI, 5V 104 FN903, 13V
1008 DVI, 3.3V 105 FN909&10&11, 13V
1009 DVI, 1.V 106 AUDIO AMP, 1V
1010 MAIN, S3.3V 107 SWFPGA, 1.V
1011 GAMMA, 15.5V 108 MAIN, S5V
101 PJNET, 5V 109 MAIN, 5V
1013 LENS, 9V 1030 LAN, 3.3V
1014 LENS, 15V 1031 FILTER, DET
1015 MAIN, 6V 103 MOTOR, TIMEOUT
1016 AUDIO SW, 1V
Temperature Error
000 Sensor A detects abnormal temperature. (IC169-ROOM)
001 Sensor A fails measurement. (IC169)
100 Sensor B detects abnormal temperature. (IC1816-LAMP)
101 Sensor B fails measurement. (IC1816)
10 Sensors B-A temperature error.
00 Sensor C detects abnormal temperature. (IC1814-PANEL)
01 Sensor C fails measurement. (IC1814)
0 Sensors C-A temperature error.
Lamp Error
3000 Lamp1 fails on
3001 Lamp1 goes out
300 Communication Error on Lamp1
System Error 4000
FPGASW, CONFIG
Shutter Error 5000 SHUTTER, ERROR
Filter Error 6000 Filter clogged
Error Log
This projector provides the error history log function. To
check the logs, you need to enter the service mode and
select Group No. "0" and Item No. "0" to "49". The error
code is displayed on the Data column. The description of
the error code is listed on the table below.
* How to enter the service mode and select the group, item
and data value, see "Service Adjustment Menu Opera-
tion".
Group
No.
Item
No.
Data
(Error Code)
0 0
1
3
:
:
49
✻
<- Latest Error
✻
✻
✻
:
:
✻
How to reset the error Log
1. Enter the Service Mode, and select Group No. "0" and Item No. "50".
The history log will be reset when the Data Value is set to "10". The value automatically returns to "0".
* How to enter the service mode and select the group, item and data value, see "Service Adjustment Menu Operation".