Sanyo PLC-XK3010, Руководство пользователя

Страница: 22 / 77

Basic Operation
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 67-68.
Main Menu Sub-Menu
③ Image select
Used to select an image mode from among Dynamic , Standard , Real , Cinema, Blackboard(Green) ,
Colorboard and Image 1-4 . (pp.3, 39)
④
Image adjust
For computer source, used to adjust computer image [ Contrast , Brightness , Iris , Color temp . , White
balance (R/G/B) , Sharpness , Gamma , Reset and Store ] (p.33).
For Video source, used to adjust picture image [ Contrast , Brightness , Color , Tint , Iris , Color temp . ,
White balance (R/G/B) , Sharpness , Gamma , Noise reduction , Progressive , Reset and Store ] (pp.40-
41).
② PC adjust
Select Auto PC adj. , Fine sync , Total dots , Horizontal , Vertical , Current mode, Clamp , Display area-
H and Display area-V to adjust the parameters to match with the PC input signal format (pp.9-31).
⑤
Screen
For computer source, used to adjust size of the image [ Normal , Full , Wide(16:9) , Zoom , True , Custom ,
Custom adj ., Digital zoom +/– , Keystone , Ceiling , Rear and Reset ] (pp.34-35).
For Video source, used to set size of image [ Normal , Full , Wide(16:9) , Zoom , Custom , Custom adj .,
Keystone , Ceiling , Rear and Reset ] (pp.4-43).
① Input
Used to select an input source from Computer 1 , Computer 2 or Video (pp.7, 36-37).
⑥ Sound
Used to adjust the volume or mute the sound or set configurations to the MIC functions (p.4).
⑧ Information
Display the input source information: Input , H-sync freq. , V-sync freq. , Screen , Language , Lamp
status , Lamp counter , Power management , Key lock , PIN code lock , Remote control and SERIAL
NO . . (p.57)
⑩ Guide
The key operation is displayed.
⑦
Setting
Used to set the projector’s operating configurations (pp.44-56).
⑨ Network
See owner’s manual of “Network Set-up and Operation”.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩