18
STEP-2 Image Editing
Spherical
Drag points with a mouse and edit the grid to spherical shape.
If the position of the grid screen is not correct, the grid lines in the square will disap-
pear.
You can confirm the editing with sending the edited data to the projector. (See p29
■
Sending )
You cannot drag each of B, D, E, G point when editing each of them to get the curved
line and further editing become impossible on calculational basis or when each of A,
C, F, H point go over the size of the screen.
Screen editing and reflection to the projected screen
See below about screen editing and reflection to the projected screen .
When moving each of B, D, E, G point equally to the edge of the screen.
Concaved surface ... Curve become steeper
Convexed surface ... Curve become gentler
When moving each of B, D, E, G point to the center of the screen.
Concaved surface ... Curve become steeper
Convexed surface ... Curve become gentler
When you want to get the shape with four lines rounded toward inside on the screen,
select " View angle setting" and set the view angle to big figure such as 120 degree
(Input 12000).
CAUTION: AFTER EDITING EACH OF A,C, F, H POINT, THE PREVIOUS EDIT FOR
THE SPHERICAL ROUNDNESS TO EACH OF B, D, E, G POINT WILL BE RESET.
WHEN EDITING SPHERICAL ROUNDNESS ,YOU NEED TO EDIT A,C, F, H POINTS
FIRST.
When you want to edit more details by gird unit, Select "Grid [Transition]
i
" in the
menu, and edit by grid unit after basic editing. Refer to
■
Grid [transition].
