-46-
■
LCD Panel convergence adjustment.
GUIDE
C
SCREW-A
SCREW-A
SCREW-B
SCREW-B
F
E
G
C
LCD P
anel
INSERT
ZOOM IN
■
Preparation before convergence adjustment.
I
nstall a "convergence adjuster" in the following procedure before convergence adjustment.
1. Loosen 2 screws B of convergence adjuster. (Figure-1)
2. Put a convergence adjuster on a prism unit, insert 2 screws A and tighten it a bit. (Figure-1)
3. Loosen 2 screws D. (Figure-3 and 4) And move the LCD panel to the position which the conver-
gence adjuster can connect easily.
4. Slide a convergence adjuster in the direction of arrow-C and insert a convergence adjuster in a LCD
panel unit. (Figure-2 and 4.)
5. Tighten 2 screws A and 2 screws B. Preparation of convergence adjustment was completed.
To remove the adjuster, take reversed in the above.
Screw-D
Fig.-1
Fig.-2
Fig.-4
Fig.-3
Screw-D
Screw-D
Optional convergence adjustment tool (Refer to page-44)
" Convergence Adjuster "
Содержание PLC-XF35
Страница 63: ... 63 CXA3562R LCD DRIVER FF ...
Страница 99: ...SANYO Electric Co Ltd Nov 2002 400 Printed in Japan ...