Sanyo PLC-XF35, Руководство по обслуживанию

Страница: 35 / 135

-35-
Normal Mode Service Mode
"MENU"
"IMAGE"
"POWER
ON/OFF"
Adjustment deta value
Service Mode
"Point Up and Down"
" and -"
0 20 80
Group Data NO.
"Point Left and Right"
Adjustment Item no.
Adjustment Group no.
Service Mode
0 20 80
Group Data NO.
Alignment procedures
Service adjustment menu operation
■
Readjustments after Parts Replacement :
After replacing electric parts and optical parts, electric readjustment and optical readjustment are required. Refer
to the section of "parts list" for the required readjustment items after parts replacement.
(Refer to page 64.)
■
To enter the "service mode."
To enter the service mode, press the "MENU" and "IMAGE"
buttons on the projector simultaneously and hold for 2 seconds.
As shown in a figure, a service mode display appears on a
screen.
■
Adjustment.
Adjust service data using the following control buttons.
1. "POINT RIGHT" --
A group number increases.
2. "POINT LEFT" ---- A group number decreases.
3. "POINT UP" ------- An item number increases.
4. "POINT DOWN" -- An item number decreases.
5. "" ------ An adjustment value increases.
6. "VOLUME - " ----- An adjustment value decreases.
■
To exit the "service mode."
Press the "POWER on/off" button only once on the projector or
remote control unit to quit the service mode.