Sanyo PLC-XE50A, Руководство пользователя

Страница: 60 / 70

Appendix
The CE Mark is a Directive
conformity mark of the European
Community (EC).
The Remote Control does not
work.
– Check the batteries.
– Make sure no obstruction is between the projector and the remote
control.
– Make sure you are not too far from the projector when using the remote
control. Maximum operating range is 11.5’ (3.5 m).
– Make sure the code of the remote control is conformed to that of the
projector (see page 49).
Indicators blinks or lights.
– Check the status of the projector with referring to “INDICATORS AND
PROJECTOR CONDITION” on pages 63-64.
Computer 2 cannot be selected.
– Select Computer 2 in the Terminal function (see page 48).
The Terminal function cannot be
selected.
– The Terminal function cannot be selected after Computer 2 is selected.
Select other input source such as Computer 1 or Video with the
COMPUTER button or the VIDEO button on the remote control so that the
Terminal function can be selected.
appears on the screen
– Your operation is invalid. Operate correctly.
Unable to unlock the Logo PIN
code lock or Security PIN code lock.
– Contact the dealer where you purchased the projector or the service
center.
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the
projector or the service center. Specify the model number and explain about the problem. We will advise you
how to obtain service.
Pixelworks ICs used.
This symbol on the nameplate means the product
is Listed by Underwriters Laboratories Inc. It is
designed and manufactured to meet rigid U.L.
safety standards against risk of fire, casualty and
electrical hazards.
60