40
Video Input
To store the adjusted data, select "Store" and press the
SELECT button. Select a level from Image 1 to 4 with the
Point
ed
buttons and press the SELECT button. The
confirmation box appears and then select "Yes".
Stored data can be called up by selecting "Image" in the
Image Level Selection on p. 38.
Image Level Menu
Move the red framed pointer
to an image item to be set and
then press the SELECT button.
To reset the adjusted data, select "Reset" and press the
SELECT button. The confirmation box appears and then
select "Yes". All adjustments return to their previous
figures.
Reset
Store
Exit the Image Adjust Menu.
Quit
✔
Note:
• Noise reduction and Progressive cannot be selected when 480p,
575p, 720p, 1035i, or 1080i is selected. (p. 37)
Store
item
Interlaced video signal can be displayed in a progressive
picture. Select one of the following.
Off...........Disabled.
L1............Select “L1” for an active picture.
L2............Select “L2” for a still picture.
Film........Select “Film” for watching a film.
With this
function, the projector reproduces pictures
faithful to the original film quality.
Progressive
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following to get smoother images.
Off...........disabled.
L1............lower reduction
L2............higher reduction
The confirmation box
appears and then
select "Yes".
Press the Point
7 8
buttons to get better balance of
contrast. (From 0 to 15.)
Gamma
Press the Point
7
button to soften the image and the Point
8
button to sharpen the image. (From 0 to 15.)
Sharpness
