Sanyo PLC-WXU30A, Руководство по обслуживанию

Страница: 39 / 134

-39-
Electrical Adjustments
Group/
Item
Item Name Function Initial Range Note
B-LCCOM 33 0-511
3 R-LCCOM-Gain 191 0-55
4 G-LCCOM-Gain 191 0-55
5 B-LCCOM-Gain 191 0-55
6 R-LCCOM-Bright 0 0-55
7 G-LCCOM-Bright 0 0-55
8 B-LCCOM-Bright 0 0-55
9 R-LCCOM-Cent 18 0-63
10 G-LCCOM-Cent 18 0-63
11 B-LCCOM-Cent 18 0-63
1 R-ENBX-PW 10 0-17
13 G-ENBX-PW 10 0-17
14 B-ENBX-PW 10 0-17
15 R-DXIN 4 0-55 Link with No.18
16 G-DXIN 4 0-55 Link with No.19
17 B-DXIN 4 0-55 Link with No.0
18 R-CLXIN 4 0-55 Link with No.15
19 G-CLXIN 4 0-55 Link with No.16
0 B-CLXIN 4 0-55 Link with No.17
1 R-ENBX1IN 9 0-55
G-ENBX1IN 9 0-55
3 B-ENBX1IN 9 0-55
Group102 : Auto Keystone Setup Value
0 OFFSET 0
-1056 -
1056
1 OFFSET SWITCH
0
0 - 1
DEBUG MODE 0 0 - 1
3 SERVICE CALIBRATION
0
0 - 1
4 LOCK COUNT
5
1 - 55
5 DELT VERT RESULT
64
1 - 55
6 ANGLE 1 COUNT 1 1 - 10
7 ANGLE COUNT
5
1 - 10
8 BLIND SECTOR 1
160
0 - 104
9 BLIND SECTOR 3
3
0 - 104
10 BLIND SECTOR BIAS 61 0 - 104
Group 103:Help mode for panle domain
0 Help mode on/off 1 0-1
1 APL threshold value 30 0 - 55
Max value
1
0 - 55
3 Value per unit time
3
0 - 50
4 Time per 1step
1
1 - 30
5 Realtime APL RO 1 - 55
Group
200
option
0 Logo Prohibition (Forced No
Brand)
Logo Prohibition (0: Menu, 1: Forced,
: China, 3-9: not used)
0 0 - Effective after AC On
1 RS3C Baudrate Baud Rate 0 0 -
0: 1900bps, 1: 9600bps, :
11500bps
PJLink Enable PJLink 0 0 - 1 0: Disable 1: Enable
4 CABLE SW Long Cable 0 0 - 10 0: Disable, 1: Enable
5 PW Debug Command
Enable
0 0 - 1
0:Disable (Serial Command Eanble)
1: Enable (PW Debug Mode)
6 Device Refresh Disable 0 0 - 1
0:Enable, 1:Disable
No last memory
7 Device Access Disable 0 0 - 1
0:Enable (Normal), 1:Disable
No last memory
1 Lamp Warning Time
(NORMAL)
Lamp Life at Normal Mode (Warning
Time at Normal)
500 -
8000
Lamp Warning Time (ECO)
Lamp Life at Eco Mode (Warning
Time at Eco)
500 -
8000
3 Lamp Warning Time (HIGH) Lamp Life at High Mode (Warning
Time at High)
500 -
8000
30 Lamp life test enable
0:Disable 1:Enable, for safety test
only
31 Lmap On time(for life test) For test purpose
3 Lamp Off time(for life test) For test purpose
33 Lamp total time(for life test) For test purpose
40 PreScaler 80 0-55
41 Htime 67 0-65535