Sanyo PLC-WXE46A, Руководство по обслуживанию

Страница: 12 / 110

-1-
Security Function Notice
This projector provides security functions such as "Key lock", "PIN code lock" and "Logo PIN code lock". When the
projector has set these security function on, you are required to enter correct PIN code to use the projector. If you
do not know the correct PIN code to the projector, the projector can no longer be operated or started. In this case,
you must reset those function first according to the resetting procedure described below and then check up on the
projector.
Function description
Key lock
Locks operation of the top control or the remote
control.
If the Key lock is enabled with top control lock, the
projector can no longer be started.
Initial setting: Key lock function is disabled.
PIN code lock
Prevents the projector from being operated by an un-
authorized person.
Initial code: “134”
Logo PIN code lock
Prevents an unauthorized person for changing the
start-up logo and captured image on the screen.
Initial code: “431”
Security Function disable
Resetting procedure
1 Disconnect the AC power cord from the AC outlet.
. As pressing the SELECt button, connect the AC power cord into an AC outlet again.
3. Keep pressing the SELECt button and then press the oN/StANd-BY button.
4. Release the oN/StANd-BY button first and then release the SELECt button.
- The PIN code lock and Logo PIN code lock will be reset as the initial PIN code at the factory and
the key lock function is disabled.
Please refer to the owner's manual for further information of the security functions.