Sanyo PLC-WL2500, Руководство пользователя

Страница: 6 / 78

6
Safety Instructions
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken.
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic parts. These areas will
become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on the
cabinet will not only get damaged but also may cause
fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.
Air Circulation
Exhaust Vent
(Hot air exhaust)
Air Intake Vent
Air Intake Vent
Exhaust Vent
(Hot air exhaust)
Moving the Projector
Do not point the projector down to project
an image.
Do not put the projector on either side to
project an image.
Install the projector properly. Improper installation
may reduce the lamp life and cause fire hazard.
Installing the Projector in Proper
Position
CAUTION IN CARRyING OR
TRANSPORTING THE PROjECTOR
– Do not drop or bump the projector, otherwise
damages or malfunctions may result.
– When carrying the projector, use a suitable case.
– Do not transport the projector by courier or any
other transport service in an unsuitable transport
case. This may cause damage to the projector.
For information about transporting the projector by
courier or any other transport service, consult your
dealer.
– Do not put the projector in a case before it is
cooled enough.
(
Do not pitch the projector more
than 20 degrees backward and
forward.
Choose the running speed of cooling fans in the fan
control setting according to the altitude in which the
projector is being used (p.57). Failure to do so may
affect the projector life.
When moving the projector, replace the lens cover
and retract adjustable feet to prevent damage to the
lens and cabinet. When the projector is not in use for
an extended period, put it into a suitable case.
Handle the projector carefully; do not drop, bump,
subject it to strong forces, or put other things on the
cabinet.
Do not roll the projector more
than 20 degrees from side to
side.
CAUTION
CAUTION ON CEILING MOUNTING
For ceiling mounting, you need the ceiling
mount kit designed for this projector. When not
mounted properly, the projector may fall, causing
hazards or injury. For details, consult your dealer.
The warranty on this projector does not cover any
damage caused by use of any non-recommended
ceiling mount kit or installation of the ceiling mount kit
in an improper location.
Do not point the projector up to project an
image.