Sanyo PLC-WL2500 Скачать руководство пользователя

Страница: 20 / 78

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT

LEAST FIVE MINUTES BEFORE TURNING IT

OFF.

Power off?

disappears after 4 seconds.

Turning Off the Projector

Press the ON/STAND-BY button on the remote control

or on the top control, and

Power off?

appears on the

screen.

Press the ON/STAND-BY button again to turn off the

projector. The POWER indicator starts to blink red, and

the cooling fans keep running. (You can select the level

of fans’ quietness and speed. See “Fan” on page 57.)

At this time, you can unplug the AC power cord even if

the fans are still running.

When the projector has cooled down enough, the

POWER indicator stops blinking and you can turn on

the projector.



Note:

• When the Direct on function is set to

, the projector

will be turned on automatically by connecting the AC

power cord to an AC outlet. (p. 52)

• The running speed of cooling fans is changed according

to the temperature inside the projector.

• Do not put the projector in a case before the projector is

cooled enough.

• If the WARNING indicator blinks or lights red, see

“WARNING indicator” on page 60.

• While the POWER indicator is blinking, the lamp is

being cooled down and the projector can not be turned

on. Wait until the POWER indicator stops blinking to turn

on the projector again.

• The fan rotation will terminate directly if the AC power

cord is unplugged immediately after the projector is

turned off.

• The projector can be turned on after the POWER

indicator turns red. The waiting time to restart will be

shortened when the normal power-off processing for fan

cooling is completed, compared with the time the AC

power cord is immediately unplugged after the power-

off.

DO NOT OPERATE THE PROJECTOR

CONTINUOUSLY WITHOUT REST.

CONTINUOUS USE MAY RESULT IN

SHORTENING THE LAMP LIFE. TURN OFF THE

PROJECTOR AND LET STAND FOR ABOUT AN

HOUR IN EVERY 24 HOURS.

Basic Operation

You can disconnect the power cord from the

wall outlet or turn off the breaker even during

projection without pressing the on/stand-by

button.



Note:

• When using the Direct OFF function, you

cannot restart the projector immediately after

the power is disconnected. If the external

power supply is suddenly cut off, the fan

stops immediately. The lamp remains high

temperature and needs to be cooled.

Direct OFF Function

Содержание PLC-WL2500















































































Результаты поиска

Содержание PLC-WL2500

Отзывы:

Похожие инструкции для PLC-WL2500

Бренды по названию

Популярные бренды

Sanyo PLC-WL2500, Руководство пользователя

Результаты поиска

Содержание PLC-WL2500

Отзывы:

Похожие инструкции для PLC-WL2500

Бренды по названию

Популярные бренды