Sanyo PLC-EF10BA, Руководство по обслуживанию

Страница: 22 / 125

-21-
■
LCD Panel Replacement
1. Remove the cabinet cover following to step 1 of “Mechanical Disassemblies”.
2. Remove the FPC cable on the main board.
3. Remove 4 screws(A) for B-Panel, 4 screws(B) for G-Panel and 4 screws(C)
for R-Panel and pull the each LCD panel upward.
4. Remove 3 screws to take off the LCD panel from the panel holder.
When the LCD panel is replaced, it is required to re-adjust the white balance,
focus, convergence and common center adjustments, and white uniformity
adjustment if required. (Refer to the Optical and electrical adjustment.)
G-panel unit R, B-panel unit
A A
B
A
B
C
C C
B
When disconnecting the FPC
cable, pull out the cable lock from
the connector and then disconnect
the FPC cable.
Connector
Cable
lock
FPC cable
LCD panel holder
LCD panel holder
LCD panel
LCD panel
R
B
G