Sanyo PID-42NE1 Скачать руководство пользователя

Страница: 3 / 48

WARNING

1) To prevent damage which may result in fire or shock hazard, do not expose this apparatus to rain or

moisture.

Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including on

shelves above, etc.)

No naked flame sources, such as lighted candles, should be placed on / above the set.

2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified

service personnel.

3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type

power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable to

insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the earthing plug.

4) To prevent electric shock, ensure the earthing pin on the AC cord power plug is securely connected.

CAUTION

This appliance is intended for use in environments which are relatively free of electromagnetic fields.

Using this appliance near sources of strong electromagnetic fields or where electrical noise may overlap with the

input signals could cause the picture and sound to wobble or cause interference such as noise to appear.

To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic fields.

IMPORTANT INSTALLATION INFORMATION

If a display is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many

injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the display.

• Only using furniture that can safely support the display.

• Ensuring the display is not overhanging the edge of the supporting furniture.

• Not placing the display on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture

and the display to a suitable support.

• Not standing the displays on cloth or other materials placed between the display and supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the display or its controls.

IMPORTANT: THE MOULDED PLUG (AC Power Cord for the United Kingdom)

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This display is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is

fitted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 10

amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark

ASA

or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained.

A replacement fuse cover can be purchased from your local dealer.
Do not cut off the mains plug.

Do not use any other type of mains lead except the one supplied with this display.

The supplied mains lead and moulded plug are designed to be used with this display to avoid

interference and for your safety.

If the socket outlet in your home is not suitable, get it changed by a qualified electrician.

If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.

WARNING : — THIS DISPLAY MUST BE EARTHED.

How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.

Important Safety Instructions

Содержание PID-42NE1

















































Результаты поиска

Содержание PID-42NE1

Отзывы:

Похожие инструкции для PID-42NE1

Бренды по названию

Популярные бренды

Sanyo PID-42NE1, Руководство по эксплуатации

Результаты поиска

Содержание PID-42NE1

Отзывы:

Похожие инструкции для PID-42NE1

Бренды по названию

Популярные бренды