Sanyo PDP-32H1A, Руководство по обслуживанию

Страница: 13 / 64

-13-
4. Optical Filter Removal
Cabinet Front includes Optical Filter to protect the
damage of Panel, improve picture quality, or
pre-
vent exposure of interference
.
For removal of Optical Filter, remove screws of
Fig.9.
[NOTE]
1. The Optical Filter is easy to be damaged. Do
not touch directly by hand. If there is dust,
remove it by watery neutral detergent.
2. The gasket (like brown tape) is sticked on the
Optical Filter. Order Optical Filter with gaskets
for service parts. Refer to parts list.
5. Servicing of Unit
(Refer to Fig.4)
For removal of Main or Audio Unit, remove screws fixed to chassis plate.
In case of Audio Unit, remove shield plate covered with Line Filters (LF1601, LF1602, LF1603).
Note : The shield plate is soldered at left side of circuit board.
6. Servicing of Back Terminal
For removal of Connect Unit, remove 25 screws (L: 3X6) of Fig.10.
Note : Terminal Unit (A, B) is connected to Connect Unit.
Fig. 9
■
PDP Panel Replacement
For change of PDP Panel (Module), proceed
1
to
3
.
Mechanical Disassemblies
L
L
L
L
Fig. 10
Gasket