Sanyo PDG-DXL100 - XGA DLP Projector, Руководство по управлению, Страница: 10 / 19

PDG-DXL100 Basic Serial Command Specifications
10/19
6.11 Volume - Command
COMMAND “C0A” [CR]
Detail
This command turns down the Volume.
This command works the same as “VOLUME
−
” button of the projector and
remote control.
The projector shows the OSD “Volume” at receiving the command.
Response
Acceptable [ACK] [CR]
Unacceptable “?” [CR]
6.12 Sound Mute ON Command
COMMAND “C0B” [CR]
Detail
This command sets “Sound Mute” ON.
It mutes the sound but does not turn off the projecting image, unlike the
operation of the key “AV-Mute” on the remote control.
It works immediately after the command is transmitted.
The projector shows the OSD “Mute” at receiving the command.
This command works only for “Sound-Mute ON” and does not operate
“Sound-Mute OFF” with command pipelining.
Response
Acceptable [ACK] [CR]
Unacceptable “?” [CR]
6.13 Sound Mute OFF Command
COMMAND “C0C” [CR]
Detail
This command sets “Sound Mute” OFF.
It releases the “Sound Mute”, but does not release “Video Mute”, unlike the
operation of the key “AV-Mute” on the remote control.
It works immediately after the command is transmitted.
The projector shows the OSD “Mute” at receiving the command.
This command works only for “Sound-Mute OFF” and does not operate
“Sound-Mute ON” with command pipelining.
Response
Acceptable [ACK] [CR]
Unacceptable “?” [CR]
6.14 Video Mute ON Command
COMMAND “C0D” [CR]
Detail
This command sets AV MUTE ON.
It turns off the projecting image but does not mute the sound.
It works immediately after the command is transmitted.
The projector shows the OSD “AV Mute” at receiving the command.
This command works only for “AV-Mute ON” and does not operate “AV-Mute
OFF” with command pipelining.
Response
Acceptable [ACK] [CR]
Unacceptable “?” [CR]