EN-1
To the Owner
Before operating this projector, read this manual
thoroughly and operate the projector properly.
This projector provides many convenient
features and functions. Operating the projector
properly enables you to manage those features
and maintains it in better condition for a
considerable time.
Improper operation may result in not only shortening
the product-life, but also malfunctions, fire
hazard, or other accidents.
If your projector seems to operate improperly,
read this manual again, check operations and
cable connections and try the solutions in the
"Troubleshooting" section in the end of this
booklet. If the problem still persists, contact
the dealer where you purchased the projector
or the service center.
READ AND KEEP THIS OWNER’S MANUAL
FOR LATER USE.
Safety Precaution
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
-
This projector produces intense light from
the projection lens. Do not stare directly
into the lens, otherwise, eye damage could
result. Be especially careful that children
do not stare directly into the beam.
-
Install the projector in a proper position. If
not, it may result in a fire hazard.
-
Provide appropriate space on the top,
sides and rear of the projector cabinet for
allowing air circulation and cooling
the
projector. Minimum clearance must be
maintained. If the projector is to be built into a
compartment or similarly enclosed, the
minimum distances must be maintained.
Do
not cover the ventilation slot on the
projector. Heat build-up can reduce the
service life of your projector, and can also
be dangerous.
-
If the projector is not to be used for an
extended time, unplug the projector from
the power outlet.
CAUTION
DO NOT SET THE PROJECTOR IN
GREASY, WET, OR SMOKY CONDITIONS
SUCH AS IN A KITCHEN TO PREVENT A
BREAKDOWN OR A DISASTER. IF THE
PROJECTOR COMES IN CONTACT WITH
OIL OR CHEMICALS, IT MAY BECOME
DETERIORATED.
15 cm
SIDE and TOP
REAR
90 cm
30 cm
30 cm