Sanyo PDG-DET100L - SXGA+ DLP Projector, Руководство по обслуживанию

Страница: 42 / 232

-4-
Electrical Adjustment
x
Auto calibration (PC)
Input mode Computer mode (Input 1)
Input signal 16-step gray scale computer signal
1. Enter the service mode.
. Select Group "
260 ", No. " 100 " and set data value to " 1 ".
3. Select Group " 260 ", No. " 0 " and set data value " 0 "
to " 1 ".
The projector begins auto-calibration and then "OK"
will appear on the screen.
4. Select Group " 260 ", No. " 100 " and set data value to " 3 ".
5. Select Group " 260 ", No. " 0 " and set data value " 0 "
to " 1 ".
The projector begins auto-calibration and then "OK"
will appear on the screen.
6. Select Group " 260 ", No. " 100 " and set data value to " 0 ".
v
Auto calibration (Component)
Input mode Video mode (Input -Component)
Input signal 100% color bar signal (480i)
1. Enter the service mode.
. Select Group "
260
", No. "
100
" and set data value to "
4
".
3. Select Group "
260
", No. "
0
" and set data value "
0
"
to "
1
".
The projector begins auto-calibration and then "OK"
will appear on the screen.
4. Select Group "
260
", No. "
100
" and set data value to "
5
".
5. Select Group "
260
", No. "
0
" and set data value "
0
"
to "
1
".
The projector begins auto-calibration and then "OK"
will appear on the screen.
6. Select Group "
260
", No. "
100
" and set data value to "
0
".
b
Auto calibration (Video)
Input mode Video mode (Input -Composite)
Input signal 16-step gray scale composite video
signal
1. Enter the service mode.
. Select Group "
260
", No. "
100
" and set data value to "
6
".
3. Select Group "
260
", No. "
0
" and set data value "
0
"
to "
1
".
The projector begins auto-calibration and then "OK"
will appear on the screen.
4. Select Group "
260
", No. "
100
" and set data value to "
0
".
c
Auto calibration (Slot)
Input mode Computer mode (Input 3)
Input signal 16-step gray scale computer signal
Slot board Analog RGB input board equipped
1. Enter the service mode.
. Select Group "
260 ", No. " 100 " and set data value to " 2 ".
3. Select Group " 260 ", No. " 0 " and set data value " 0 "
to " 1 ".
The projector begins auto-calibration and then "OK"
will appear on the screen.
4. Select Group " 260 ", No. " 100 " and set data value to " 0 ".
z
Fan driving voltage adjustment
Equipment Digital voltmeter
Lamp mode Lamps
Lamp control Eco1
1. Enter the service mode.
. Change data values of each test point to adjust the fan
driving voltage.
Group No. Fan Connection Adjustment value
250 - 1 Fan_1 K66S-1 13.8 +0 -0.1Vdc
250 - 0 Fan_1 K66S-1 5.0 +0.1 -0Vdc
250 - 3 Fan_ K66S- 13.8 +0 -0.1Vdc
250 - 2 Fan_ K66S- 4.0 +0.1 -0Vdc
250 - 5 Fan_3 K66S-3 13.8 +0 -0.1Vdc
250 - 4 Fan_3 K66S-3 6.0 +0.1 -0Vdc
250 - 7 Fan_4 K66S-4 13.8 +0 -0.1Vdc
250 - 6 Fan_4 K66S-4 6.5 +0.1 -0Vdc
250 - 9 Fan_5 K66S-5 13.8 +0 -0.1Vdc
250 - 8 Fan_5 K66S-5 5.0 +0.1 -0Vdc
Note :
Group Fan_1: FN905
Group Fan_: FN904, FN906
Group Fan_3: FN903, FN907, FN909
Group Fan_4: FN901, FN90
Group Fan_5: FN908
Adjustments item no. [] to [5] are carried out at the
spare parts shipment in the factory, therefore they are not
required when the main board is replaced with new one.