Sanyo LCD-47XR8DA, Руководство по обслуживанию

Страница: 39 / 41

!
Do not remove the stand from the TV unless using an optional bracket to mount it.
!
The appearance of the unit may differ from the actual one.
Note
To remove the stand:
(if wall mounting)
1
.Lay your TV flat (screen down) on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV
is not scratched.
2
. Loosen the nine screws on the Stand to remove the Stand. (Please keep all these screws for future use if you want to
install the stand again.)
To install the stand
1
.Lay your TV flat (screen down) on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV
is not scratched.
2
. Align the stand column with the hole in the TV back, and then secure the stand to the TV with nine screws (M4x40).
(Please note the stand’s front and back, otherwise the TV may be unstable and tip over.)
Note
Removing or Installing the Stand
Cautions:
1. Carefully handle the unit during setup and consult authorized service personnel to ensure successful
installation.
2. Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from
being damaged.
3. Disconnect the AC power cord firstly.
Note Note
Loosen nine screws ( M4x40)
to remove the stand
d Stan
Stand
Stan a k d b c
Use nine screws ( M4x40)
to secure the stand