Sanyo LCD-47XR2 Скачать руководство пользователя

Страница: 27 / 30

Trouble shooting

1. Fault clearance

Before servicing please check to find the possible causes of the troubles according to the table

below.

1.1 Antenna (signal):

Picture is out of focus or jumping

Bad status in signal receiving

Poor signal

Check if there are failures with the electrical connector or
the antenna.

Check if the antenna is properly connected.

Fringe in picture

Check if the antenna is correctly oriented.

Maybe there is electric wave reflected from hilltop or
building.

Picture is interfered by stripe shaped
bright spots

Possibly due to interference from automobile, train, high
voltage transmission line, neon lamp etc.

Maybe there is interference between antenna and power
supply line. Please try to separate them in a longer
distance.

Maybe the shielded-layer of signal wire is not connected
properly to the connector.

There appear streaks or light color
on the screen

Check if interfered by other equipment and if interfered
possibly by the equipment like transmitting antenna,
non-professional radio station and cellular phone.

1.2 TV set:

Symptoms Possible

cause

Unable to switch the power on

Check to see if the power plug has been inserted properly
into the socket.

No picture and sound

Check to see if the power supply of liquid crystal TV has
been switched on. (As can be indicated by the red LED at
the front of the TV set)

See if it’s receiving the signal that is transmitted from other
source than the station

Check if it’s connected to the wrong terminal or if the input
mode is correct.

Check if the signal cable connection between video
frequency source and the liquid crystal TV set is correct.

Deterioration of color phase or color
tone

Check if all the picture setups have been corrected.

Screen position or size is not proper

Check is the screen position and size is correctly set up.

Picture is twisted and deformed

Check to see if the picture-frame ratio is properly set up.

Picture color changed or colorless

Check the “Component” or “RGB” settings of the liquid
crystal TV set and make proper adjustment according to the

Содержание LCD-47XR2































Результаты поиска

Содержание LCD-47XR2

Отзывы:

Похожие инструкции для LCD-47XR2

Бренды по названию

Популярные бренды

Sanyo LCD-47XR2, Руководство по обслуживанию

Результаты поиска

Содержание LCD-47XR2

Отзывы:

Похожие инструкции для LCD-47XR2

Бренды по названию

Популярные бренды