Sanyo LCD-19R30, Руководство по обслуживанию

Страница: 9 / 37

7
8 1024
×
768@60 Hz 48.40 60.00 65.00 VESA
9 1024
×
768@70 Hz 56.50 70.00 75.00 VESA
10 1024
×
768@75 Hz 60.00 75.00 78.75 VESA
11 1360
×
768@60 Hz 47.71 60.01 85.50 VESA
4.5 HDMI input check
Respectively input all format HDMI signal (shown at below table 5) by VG849 signal generator,
check if picture display and sound are normal.
Table 5: HDMI signal format
# Resolution H-freq. (kHz) V-freq. (Hz)
Dot-clock freq.
MHz)
Remarks
1 712
×
484@59.94/60 Hz 15.734 59.94/60 13.50 480i(59.94/60p)
2 702
×
574@50Hz 15.625 50 13.50 576i/50
3 720
×
483p@59.94/60 Hz 31.469 59.94/60 27.00 480p(59.94/60p)
4 720
×
576p@50 Hz 31.25 50 27.00 576p/50
5
1280
×
720@50 Hz 37.50 50 74.25 720p/50
6
1280
×
720p@59.94/60 Hz 44.96 59.94
74.18 720p(59.94/60p)
7 1920
×
1080i@50Hz 28.125 50 74.25 1080i/50
8 1920
×
1080i@59.94/60 Hz 33.75 59.94 74.25 1080i(59.94/60i)
9 1920
×
1080p@23.98/24 Hz 27.00 23.98/24 74.25 1080p(23.98/24p)
10 1920
×
1080p@50Hz 56.25 50 148.50 1080p/50
11 1920
×
1080p@59.94/60 Hz 67.50 60.00 148.50 1080p(59.94/60p)
Note: A DVI device also can be connected to the HDMI jack by using a DVI to HDMI adapter cable.
About supported DVI signal format, please refer to table 4 PC signal format and table 5.
4.6 HDMI sound supporting format
HDMI sound only supports PCM format, its sample rate supports 32 KHz, 44 KHz and 48 KHz.
5. Default setting for user menu
Go to factory menu “User Menu Init” item, press ENTER button on the remote control, then the TV
will preset all settings to default. After factory alignment, this step must be done surely.
6. Packing
Check accessory then pack the TV.