Sanyo ICR-EH800D - Xacti Digital Sound Recorder, Инструкция по эксплуатации

Страница: 45 / 138

45
2
Turn on the power.
Turning on the power (page 22)
3
Slide the LINE/MIC switch to LINE.
Changing the recording mode (page 87)
4
Start playing the external sound source,
and press the REC button on the unit to
start recording.
• The recording will be stored in the LINE (L)
folder.
• For recording from external input, the recording
level on the unit cannot be adjusted.
• Before the real recording, first test it so that
you can adjust the external device for desired
quality.
If the sound volume is too high, cracking sound
will occur.
5
To stop recording, press the STOP/BACK
button. Also, stop playback on the
external device.
• If the sound volume on the external device has already been set to its maximum but yet
the sound in line-in recording is small, slide the LINE/MIC switch to MIC and adjust the
recording level, then perform recording again. In this case, recording will be saved in the
selected microphone folder (A to D). (
page 17)