Auto :
Convert to the appropriate aspect ratio
automatically.
TV Aspect Ratio
1
Use [
…
/
†
] to select ‘TV Aspect‘ while the
‘Video‘ submenu is displayed.
2
Press [ENTER] or [
√
] to go to the second level.
3
Use [
…
/
†
] to select the desired ‘TV Aspect’.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
4:3 LB :
Select when a standard 4:3 TV is
connected. Displays theatrical images with masking
bars above and below the picture.
4:3 PS :
Select when a standard 4:3 TV is
connected. Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.
16:9 :
Select when a 16:9 wide screen TV is
connected.
Video Output
Progressive Scan Video provides the highest picture
quality with reduced flickering.
Interlace or Progressive :
If you connect the
HDD/DVD Recorder to a digital television (DTV) or
Monitor using the COMPONENT jacks, set Video
Output to ‘Interlace’ or ‘Progressive’.
RGB :
Not available
Follow the same procedure as ‘TV Aspect Ratio’ to
change the ‘Video Output’.
Caution
• Once the Progressive Scan setting is entered,
an image will only be visible on a Progressive
Scan compatible TV or monitor. Press and
hold [P.SCAN] for 5 seconds to return to
Interlace Scan mode.
Video
TV Aspect
Auto
Video Output
Interlace
Instructions:
Enter-Confirm Setup-Exit Move
…†
Select Picture
Format
4:3 LB
4:3 PS
16:9
Auto
Video
TV Aspect
Auto
Video Output
Interlace
Instructions:
Enter-Confirm Setup-Exit Move
…†
Select Video
Output
Interlace
Progressive
RGB
1
Press [SETUP].
2
Use [
œ
/
√
] to select ‘Preferences‘.
3
While ‘Preferences‘ is selected, press [
†
] to
select ‘Video‘.
4
Press [ENTER]. The ‘Video‘ submenu is
displayed.
PREFERENCES / Video Settings
Preferences
Video
Audio
Parental Controls
Auto Settings
N/A
Hard Disk
Instructions:
Enter-Confirm Setup-Exit
Move
…†
24
Setup menu
DG-M13-23E1D-HR-O(GB) 2006.7.14 3:59 PM ˘
` 24 mac001 1200DPI 100LPI
