Sanyo HEC-DR7700 Скачать руководство пользователя страница 6

Страница: 6 / 16

HOW TO INSTALL THE STAND

Installation

screws

Remove the covers on the outer

sides of the arm rests.

Insert the flathead screwdriver into the

holes under the cover and pull toward

you. (4 places)

Put the cords of the remote control

and sensor controller in the cord

hook on the back of the body.

Secure the stand on the left-hand

side of the arm rest, using the

installation screws (3 screws).

Place the covers on the outer sides

of the arm rests.

Install the cover A on the left-hand side,

and cover B on the right-hand side.

Put the remote control on the

remote control stand (upper part).

Put the sensor controller on the

sensor controller stand (lower part).

Put the remote control on the remote

control stand in a tilted position as the

arrow

①

shows, and then push it in the

direction of arrow

②

Put the cords of the remote control

and the sensor controller in the

hooks of the sensor controller stand.

The post holder in the

lower part of the sensor

controller stand has

hooks on both sides.

Place the sensor

controller cord with

the stopper in the hook

closer to the arm rest.

Place the remote control

cord in the opposite

hook.

Uninstall the cord hook from the

right-hand side of the arm rest,

and install it on the left-hand side.

①

Remote control

Sensor controller

②

Remote control

stand

Sensor controller stand

①

Uninstall

③

Install

②

Thread the cord

①

Uninstall

②

Install

Installation

screws

Tools needed: Phillips (crosshead) screwdriver, flathead screwdriver

(

＊

screwdrivers are not included)

Installation on the right-hand side of the arm rest

Installation on the left-hand side of the arm rest

Remove the cover of the right-hand

side of the arm rest.

Insert the flathead screwdriver into the

holes under the cover and pull toward

you. (4 places)

Secure the stand on the right-hand

side of the arm rest, using the

installation screws (3 screws).

Place the cover on the right-hand

side of the arm rest.

Put the remote control on the

remote control stand (upper part).

Put the sensor controller on the

sensor controller stand (lower part).

Put the remote control on the remote

control stand in a tilted position as the

arrow

①

shows, and then push it in the

direction of arrow

②

Put the cords of the remote control

and the sensor controller in the

hooks of the sensor controller stand.

The post holder in the lower part of the

sensor controller stand has hooks on both

sides. Place the sensor controller cord with

the stopper in the hook closer to the arm

rest. Place the remote control cord in the

opposite hook.

Tools needed: Phillips (crosshead) screwdriver, flathead screwdriver

(

＊

screwdrivers are not included)

①

Remote control

Sensor controller

②

Remote control

stand

Sensor controller stand

Sensor

controller

Remote control

Sensor controller stand

Remote control

Sensor controller

Sensor controller stand

Cover A

①

Insert

②

Pull toward you.

Cover B

Remote control cord,

Sensor controller cord

Cord hook

Stopper

Arm rest

Hook

Post

Post holder

Содержание HEC-DR7700

















Результаты поиска

Содержание HEC-DR7700

Отзывы:

Похожие инструкции для HEC-DR7700

Бренды по названию

Популярные бренды

Sanyo HEC-DR7700, Инструкция по эксплуатации

Результаты поиска

Содержание HEC-DR7700

Отзывы:

Похожие инструкции для HEC-DR7700

Бренды по названию

Популярные бренды