Sanyo HEC-DR5700, Инструкция по эксплуатации

Страница: 8 / 32

7
NAME/FUNCTION OF EACH PART (continued)
＊
The remote power switch cuts the
power supply after approximately
3 hours since you turned on the
switch.
REPEAT! display
MASSAGE ADJUST display
STIFFNESS display
The right side of the lamp indicates the degree of
stiffness, and the left side of the lamp indicates
the degree of relaxation.
The more the right side of the lamp is illuminated,
the higher the degree of detected stiffness.
Body areas that can be massaged.
Areas where stiffness has been detected.
SOLE WARMER display
Shoulder position measurement /
Original position display
MASSAGE OPERATION
display
WHOLE BODY SENSOR
AUTOMATIC COURSE display
Turns on during a Whole
Body Sensor Automatic
Course. ( flickers)
does not light up if
the fingers (hand) are not
placed on the sensor.
Illuminates if the fingers (hand) are not
placed on the sensor during a measurement
of stiffness in the Whole Body Sensor
Automatic Courses.
(Remote control display)
Sensor controller Remote power switch
Repeat button
RECLINING buttons
Sensors
The ”SHOULDER” icon flickers when the figure
(the shoulder position) is being measured, and
”ADJUST” lights up when the measurement is over.
Displays the operation of the
current massage technique.
Turns on when the sole heater
is on.
TWIST AIRBAG DISPLAY
Blinks during twist airbag
operation.
The degree of perspiration is
measured if the fingers are placed
on the sensors during a Whole
Body Sensor Automatic Course.
Displays the adjusted level of the strength
and speed of massaging and the width
of massaging rollers.
When these displays turn on, you can
adjust them with each adjust button.
If this button is pressed during
Whole Body Sensor Automatic
Courses or Automatic Courses,
the current massage will be repeated
once.
Adjusts the angle between the
back rest, seat and the foot rest.
The back rest and foot rest are
moved in conjunction with each
other.
Remote control can be used to turn
on this remote power switch after
turning on the POWER switch on
the main unit.
Turns on during Whole Body Sensor
Automatic Courses and Automatic Courses.
The ring lights up by pressing the REPEAT!
button when you want to repeat your
desired massage during the course of
massaging.
While the degree of stiffness is being
measured in a Whole Body Sensor
Automatic Course, the result
is displayed with the color
of the ring.
Green: Relax
Orange: Slight degree of stiffness
No display: High degree of stiffness