Sanyo EM?S667S, Руководство пользователя

Страница: 8 / 10

[7]
HOW TO SET THE OVEN CONTROLS
Each time a button is touched, a beep will sound to acknowledge the touch.
SETTING THE CLOCK
To enter the oven clock time,
1. Touch CLOCK button.
2. Touch CANCEL button.
3. Use the number pads to enter time. You
must touch at least 3 numbers to set the
clock (one for hour, and two for minutes).
4. Touch CLOCK button again to confirm
NOTE:
This is a 12 ‐ hour clock. Default setting is
1:01 when the oven is plugged in.
You can check the clock the clock time
when cooking is in progress by touching
the CLOCK button.
SETTING COOKING TIME AND POWER
1. Touch TIME pad.
2. Use the number pads to set a cooking
time.
You can set a cooking time from one
second to 99 minutes and 99 seconds. If
you are setting time greater than one
minute, you must enter numbers for both
minutes and seconds. For example, to set
20 minutes, enter 2,0,0,0.
3. If you want to set a power level other
than 100% power, touch POWER,
4. Use the number pads to enter the
power level. You can set the power level
from 1 to 9. (Please check the following
table).
5. Touch START to start cooking.
You can skip steps 3 ‐ 4 if you are to cool
with full power.
SINGLE DIGITS TO REPRESENT POWER
LEVEL
Press Number Pad Power Level
9 90% of total
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
MULTI ‐ STAGE COOKING
Some recipes may require setting a multi ‐
stage program involving defrosting, and
different power levels. The following
example shows the steps in setting up
such a program.
1. Touch CANCEL button to reset the
system.
2. Input jet ‐ defrost program.
3. Touch MEMORY button.
4. Input microwave ‐ cooking program.
5. Touch MEMORY button again.
6. Input another microwave cooking
program with probably lower power level
setting.
7. Touch START button.
NOTE
Logically, JET DEFROST or WEIGHT
DEFROST must proceed any cooking
function in a multistage cooking program.
The respective lights will come on to
indicate which stage the oven is operating
in. After total time has elapsed, 3 beep
sound.
PRE ‐ SET COOKING
You can put food in the oven, and
program the oven to start up in a later
time within the oven’s clock cycle (12
hours).
Suppose you want to set the oven to start ‐
up at 2 o’clock.
1. Place food in the oven
2. Touch PRE ‐ SET button.