background image

 

SERVICE MANUAL

CAUTION

Before servicing the oven, read the “Safety Precautions” section on page 2 of this manual.

POWER REQUIREMENTS

230

 Volts AC

10

 Ampere (Single Circuit)

50

 Hertz

Single Phase, 3 Wire Grounded

POWER OUTPUT

900

 Watts nominal of R-F

microwave energy at operating fre-
quency of 2,450 MHz

UNIT DIMENSIONS

Width 

520mm

Height 

292mm

Depth 

376mm

Shipping Weight 

18.8kg

COOKING CAVITY DIMENSIONS

Width 

349mm

Height 

220mm

Depth 

350mm

Safety Precautions.......................................................................Cover
Installation Instructions ........................................................................2
General Information.............................................................................2
Microwave Radiation Test ...................................................................2
Safety Precautions for Disassembly and Repair.................................3
Description & Function of Components...............................................3
Electrical Operation .............................................................................4
Door & Interlock Adjustments ..............................................................4
Component Test Procedures...............................................................5
Disassembly & Replacement of Parts.................................................6
Wiring Diagram ...................................................................................8
Schematic Diagram .............................................................................9
Exploded View ..................................................................................10
Exploded View Parts List...................................................................11

SPECIFICATIONS

CONTENTS

NOTICE

This service information is intended for use by a service technician who is familiar with proper and safe procedures to be followed
when repairing any electrical or gas appliance and who is equipped with proper tools and testing devices. Repairs covered in this
publication and made by uninformed persons can result in hazards developing due to improper assembly or adjustment. While mak-
ing such repairs, persons not having the proper background may subject themselves to the risk of injury or electrical shock which
can be serious or even fatal.
A. If the oven is operative prior to servicing, a microwave emission check should be performed prior to servicing the oven.
B. Inform the manufacturer, importer, or assembler of any certified oven unit found to have a microwave emission level in excess

of 5 mW/cm2. Repair any unit found to have excessive emission levels at no cost to the owner and attempt

 to ascertain the cause

of the excessive leakage. The owner of the unit should be instructed not to use the unit until the oven

 has been brought into

compliance.

C. If the oven operates with the door open: 1) tell the user not to operate the oven and 2) contact the manufacturer and/or importer

immediately.

D. Remember to connect the monitor switch after replacement and to check interlock/monitor continuity.

IMPORTANT NOTE TO THE CONSUMER

The manufacturer will not be responsible for injury or property damage arising from service performed by anyone other than author-
ized Service Centers. If you perform service on your own products, you must assume responsibility for personal injury or property
damage which may result.

REFERENCE No. 

SM

-2400014

Product Code No.

EM-

FL50NEUK

    

1-437-

602

-

13

Model
EM-FL50N

Содержание EM-FL50N












Отзывы: