12
CHECKINg ACCuMuLAtIVE COOKINg tIME, NuMBER OF DOOR
OpERAtIONs AND CONtROL OF tHE BuZZER sOuND
When checking accumulative cooking time. This function is for service person to see the life of magnetron or other parts.
Example:
KEy
OpERAtION
DIspLAy WINDOW
1
• Press CLEAR key.
2
• Press TIME key.
3
• Press 8 two times.
Step 1 to 3 are the same for all options. Input the 4th step as follows to check or change the modes.
4
• Input one of the following options (80-99).
e.g. Input number 81 to check accumulative cooking time.
81 ... Cumulative cooking time display (clear available)
82 ... Cumulative door operations
83 ... Remaining cooking time display when cooking is
interrupted by door opening
84 ... Cancel remaining cooking time when cooking is
interrupted by door opening
85 ... Buzzer tone after cooking completed (short beeping (0.5
sec. ON
→
0.5 sec. OFF) x 2
→
2.5 sec. ON)
86 ... Buzzer tone after cooking completed (continuous beeping
3 sec. ON)
87 ... Buzzer volume (Quiet)
89 ... Buzzer volume (Loud)
80 ... Buzzer volume (Off)
91 ... Reminder buzzer sounds after operation is complete
92 ... Reminder buzzer does not sound after operation is complete
93 ... Reminder display appears after operation is complete
94 ... Reminder display does not appear after operation is complete
95 ... Filter cleaning display appears and buzzer sounds
96 ... Filter cleaning display does not appear and buzzer does
not sound
99 ... Memory overwrite locked
90 ... Memory overwrite unlocked
5
• Press START key.
• All 4 digits will be flashing.
6
• Press START key again.
• The number “215” shows total cooking time in hours.
• In case where options other than 1 or 2 were selected in stage
4, “0” appears on display confirming that the new setting has
been accepted.
7
• Press CLEAR key to clear the display for the option 1 and 2.
Display shows accumulative cooking time or the number of door operations by key operation. Also, you can change any remaining
cooking time, buzzer sound or buzzer volume.
