– 11 –
EN
DVD FUNCTIONS
Playback
[DVD]
[CD]
(
[JPEG]
on page 12
)
1
Press
[
y
]
to turn on this unit.
2
Press
[
A
]
and insert a disc
with label facing up.
3
Press
[
B
]
to start playback.
4
Press
[
C
]
to stop playback.
Note(s):
• Slow forward speed is different depending on the disc.
Approximate speed is ×1/2, ×1/4 and ×1/8.
Slow forward search
[DVD]
Press
[
g
]
repeatedly in the pause mode
to select the required forward speed.
To continue playback, press
[
B
]
.
SF 1/2
Fast forward / Reverse search
[DVD]
[CD]
Use
[
g
]
or
[
h
]
repeatedly during
Playback to select the required forward or
reverse speed.
To continue playback, press
[
B
]
.
X2
Pause and step-by-step playback
[DVD]
[CD]
[JPEG]
Press
[
F
]
during playback.
To continue playback, press
[
B
]
.
[DVD]
The disc goes forward by one frame each time
[
F
]
(on the
remote control) is pressed in the pause mode.
To continue playback, press
[
B
]
.
Note(s):
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
Resume playback
[DVD]
[CD]
Press
[
C
]
during playback. PRE STOP icon
will appear at the top-left on the TV screen.
Press
[
B
]
. RESUME icon will appear at the
top-left on the TV screen and playback will
resume from the Point where playback was
stopped.
PRE STOP
Note(s):
• To cancel resume, press
[
C
]
one more time in the stop
mode.
• The resume playback information stays in unit memory
even when the power is turned off, as long as the disc
stays in the unit.
Note(s):
• Fast forward or reverse search speed is different depending
on the disc. Approximate speed is ×2, ×4, ×8 and ×20.
Note(s):
• Zooming function does not work while the disc menu is
displayed.
• Some part of the picture may not be zoomed depending
on the disc or playback status.
Disc menu
[DVD]
Some discs contain menus which allow you to customize DVD
playback. Use
[
K
/
L
/
0
/
1
]
to select an item, then press
[OK]
,
[
B
]
(on the unit).
2
Zoom
[DVD]
[JPEG]
1) Press
[ZOOM]
repeatedly during playback
to select the required zoom factor:
×1.5, ×2 or ×2.5.
2) Use
[
K
/
L
/
0
/
1
]
to slide the zoomed
picture across the TV Screen.
3) To exit the zoom function, press
[ZOOM]
repeatedly to
select “ZOOM 1”(Off).
ZOOM 2
Calling up a menu screen during playback
[DVD]
• Press
[MENU]
to call up the disc menu.
• Press
[TOP MENU]
to call up the title menu.
4
3
1
2
Before:
Turn on the TV, amplifier and any other device(s) which are
connected to this unit. Make sure the TV and audio receiver
(not included) are set to the correct channel/Input.
Note(s):
• When you play back a DVD or CD-R/-RW with JPEG Files,
refer to details on page 12.
• “
This operation is not available.” may appear at the top-
left on the TV screen when the operation is prohibited by
the disc or this unit.
• Some DVD may start playback from title 2 or 3 due to
specific programs.
• During the playback of a 2-layered disc, pictures may stop
for a moment. This happens while the 1st layer is being
switched to the 2nd layer. This is not a malfunction.
• You can change the on-screen language in “Menu” setting.
(Refer to page 18.)
Please note :
• Most instructions in this manual refer to remote control use.
• This unit will automatically turn on the screen saver after 5 minutes of inactivity and into the standby mode after 25 minutes
of inactivity.
Lights up when power is On.
2 1